Am i doing it right?

[tsek]

Hi I am new to ecu "reading".
I have a kess v2 clone and i would like to know more about ecu tunning starting from my car.
I have read the ecu but i don't know if i have done it the right way.
I would appreciate if someone can give a look at the file and tell me if it is something wrong.

HW: 0261S04353
SW: 1037399217
SW upg.: 1Z0907115J 0040

Thanks.

[Pyromaniak]

file its ok, when you tune it, write in car ---> car not start.... than write original and car start now ;)

[tsek]

Is there any chance my car will not start after flashing back the tuned file?
Because of the checksum?

[Milicija]

Is there any chance my car will not start after flashing back the tuned file?
Because of the checksum?

Hello, KESS automatically calculate's CS when writting, you don't need to calculate with other software...

[Pyromaniak]

Is there any chance my car will not start after flashing back the tuned file?
Because of the checksum?

yes, need read with ktag full read. Make Tprot off and than you can write tuning file.

this ecu edc17 not best to playng (learning) you need some experience

you must more reading and sarching for info.

You asking: im trying to be good in yours job -Am i doing it right?

[tsek]

My ecu is already tuned from a professional tuner. But i remember that he don't bench read or flash it. He only use the obd port and i cannot remember the tool he used.
Maybe the tprot is off already?

Just for reference the car is modifyed with a bigger turbo, downpipe and catless resonated exaust. (stage 1,5-2?).

[Pyromaniak]

My ecu is already tuned from a professional tuner. But i remember that he don't bench read or flash it. He only use the obd port and i cannot remember the tool he used.
Maybe the tprot is off already?

Just for reference the car is modifyed with a bigger turbo, downpipe and catless resonated exaust. (stage 1,5-2?).

maybe tprot off, after this you can write partial file