View Full Version : 77960-stx-a211-m1 internal failure
borshch
27th March, 2019, 03:10 PM
Acura MDX, 77960-stx-a211-m1 internal failure after clearing.
this is denso enesas h8sx mcu.
i cleared again, wrote and verified shows OK.
if internal failure must be some bad component inside ?
also maybe someone has pinout for this so i can connect on bench and test with scanner before customer comes
jarek88
27th March, 2019, 04:52 PM
https://carprotool.com/download/Pinouts/CarProTool%20Programmer/CPT%20Renesas%20H8SX%20R5F6172x/Renesas%20H8SX%20R5F6172x%20CAN/CPT_HONDA_H8SX_K-LINE_PINOUT.jpg
borshch
27th March, 2019, 05:20 PM
https://carprotool.com/download/Pinouts/CarProTool%20Programmer/CPT%20Renesas%20H8SX%20R5F6172x/Renesas%20H8SX%20R5F6172x%20CAN/CPT_HONDA_H8SX_K-LINE_PINOUT.jpg
K-line wont help to connect to scanner.
need CAN HIGH and LOW pinout
jarek88
27th March, 2019, 05:32 PM
You must find CAN filter or CAN Transceiver. Simple work.
borshch
27th March, 2019, 08:57 PM
You must find CAN filter or CAN Transceiver. Simple work.
how ? how does it look like ?
jarek88
28th March, 2019, 12:30 PM
Make a picture of the board and show me.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.