View Full Version : DDE7 811 111 EWS4 SYNC ISSUE - DESPERATE TO RESOLVE
RSWORXRAVZ
29th March, 2019, 09:43 AM
Please can one of the DK Veterans assist me with sync issue on e83 X3- n47d20a engine.
Battery ran flat and car wont start. cranks but wont start. any assistance please. Im stuck with this car for 3 months. Dumps below.
thanks in advance.
levisdj
29th March, 2019, 10:15 AM
What DTC you have ?
RSWORXRAVZ
29th March, 2019, 10:47 AM
only code is 2E41 in engine DDE.
ecu: DDE7 811 111
EWS: EWS 4.3
Engine: N47d20a
No fault codes stored in ews.
Please let me know if you need any files. I can post them.
levisdj
29th March, 2019, 11:21 AM
Sync cas and dme, with diag and car will start
shanektm450
29th March, 2019, 11:42 AM
These cars with ews 4 have software issue take ews3 read and post file here will change vin and write keydata plus ISN car will start . If ews4 does alighn then it will come back it is software issue
Cheers
Shane
RSWORXRAVZ
29th March, 2019, 12:11 PM
sorry Shane. Must i get a EWS3 and read it and post the dump?
shanektm450
29th March, 2019, 01:09 PM
sorry Shane. Must i get a EWS3 and read it and post the dump?
yes then i will change data
RSWORXRAVZ
30th March, 2019, 08:47 AM
Hi Shane,
i have been trying since yesterday to read this ews3 module i have. tried 3/4 different units. using ak90. i get pin no touch error. Please bare with me. im trying to read the ews3 file for you.
shanektm450
30th March, 2019, 10:40 AM
Read with xprog its easy
RSWORXRAVZ
30th March, 2019, 11:22 AM
i tried with xprog -I can hear a relay clicking from the ews but it wont read. I tried 4 EWS units . ALl doing the same thing
??
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.