2014 honda civic 77960-TR0-A222-M1 VIRGIN FILE

[glenchafe]

does anyone have virgin file for 2014 Honda civic 77960-TRO-A222-M1 I damaged eeprom removing now I cant read , have new eeprom but need good working file to install . thanks

[dmka]

Here you go...





REP + THANK

[dmka]

...and don't start multiple threads for the same question.

[glenchafe]

thank you and thank you for the advice will install tomorrow and report back

[glenchafe]

Won’t be able to install till Monday but will report back immediately. Thanks

[donchester]

hi mate i was wondering if you could help me out with this civic as well i tried to download the file but it is asking me for a password.. could you help me thaks

[glenchafe]

Installed this file on 2 modules with this part number , one module was good after I done sws initialization, except when airbag light proved out , usually it’s on for a second then goes out on most cars I have done but after installing module I noticed light comes on for blink of eye amd goes out right away it’s a lot faster then normal ,however it stays out and no codes in module . The second module has code still u3000 internal failure . I should mention I replaced eeprom in both . Could the module with u3000 just be no good ? Originally I installed that module in a car and it had a code for blown seatbelt which the car did have and that was only code in module but once seat belt was replaced that code went and ended up with the u3000 internal failure code again . Not sure why it didn’t have that code at first and only after fixing seatbelt code . But the file worked in the one module . Should the light prove out bit longer? Thanks again for your help

[BestElectrical]

Installed this file on 2 modules with this part number , one module was good after I done sws initialization, except when airbag light proved out , usually it’s on for a second then goes out on most cars I have done but after installing module I noticed light comes on for blink of eye amd goes out right away it’s a lot faster then normal ,however it stays out and no codes in module . The second module has code still u3000 internal failure . I should mention I replaced eeprom in both . Could the module with u3000 just be no good ? Originally I installed that module in a car and it had a code for blown seatbelt which the car did have and that was only code in module but once seat belt was replaced that code went and ended up with the u3000 internal failure code again . Not sure why it didn’t have that code at first and only after fixing seatbelt code . But the file worked in the one module . Should the light prove out bit longer? Thanks again for your help


U3000 sometime can be from the opds, try to calibrate sws.

When you turn on the ignition first time, the airbag light should be on for about 7 sec. If you turn off the ignition and turn it back on without waiting for over 10 seconds you will not see this happen. ECU has capasitors that store energy for some time and the module does not shut down right away, thats why the light goes off right away on ignition recycle.

[fieris]

I need this file for Honda Civic 2014.
Please, Could you send me the password by pm.
Thanks you.
Att: Fieris

[nassimdj]

can you send the file to me , i need to try it to see if it can get rid of dtc u3000-49 that i am dealing with
thank you

[tavyx]

hello, can you please send the pass? i need one for a module that I have u0300 code, internal issue