Renault Scenic 1998 - PIN CODE

[kennovic]

Hello Guysss,

anyone knows how to get the PIN Code from a Renault Megane Scenic I (First Model) from 1998.

The IMMO is on and I try to program a new key, but the SBB asks me first for PIN Code.

Here is the VIN: VF1JA0LL519180602

Date: 11/1998

Petrol


BIG THANK´S FOR HELP!!!

[key4man]

Hello Guysss,

anyone knows how to get the PIN Code from a Renault Megane Scenic I (First Model) from 1998.

The IMMO is on and I try to program a new key, but the SBB asks me first for PIN Code.

Here is the VIN: VF1JA0LL519180602

Date: 11/1998

Petrol


BIG THANK´S FOR HELP!!!
Hello, my friend ,
You can not get the code through the vehicle, this system is based on infrared and need to dismantle the key, inside the black plastic or on the board are written numbers and letters and through software can be converted to PIN Code, then using the lock button can enter the 4 digit immobiliser code and Over-riding the imobiliser to start the car
I can help you to convert the code if you send a clear picture.

[kennovic]

Hey key4man :)

thank you for your time. Can you send a example of this „Black Box“ because i don‘t know how it looks like.


thank you my friend.

[Catalizator]

example where precode is located

[Talleresmalaga]

Hello Guysss,

anyone knows how to get the PIN Code from a Renault Megane Scenic I (First Model) from 1998.

The IMMO is on and I try to program a new key, but the SBB asks me first for PIN Code.

Here is the VIN: VF1JA0LL519180602

Date: 11/1998

Petrol


BIG THANK´S FOR HELP!!!

this is the code that your vin generates = 355980467472

in case the above described form will fail


regards

[Stopro92]

Try pin code 333038774678

[kennovic]

Thank you all. Im back from the Garage now. How to extract the Numbers now to a PIN? They must have 4 digits or?

Here are all the Pictures that I make:

610292610293610294610295610296



REMOTE WORKS PERFECT.

[kennovic]

610297610298610299610300610301

[kennovic]

610302610303610304

[kiszka]

610297610298610299610300610301
only read eeprom UCH or visit to the Renault Service

[kennovic]

only read eeprom UCH or visit to the Renault Service





OK. I can read it with clip ST01 cable or have to solder?


Thank´s!

[Stopro92]

Have you tested my pin?

[kennovic]

Have you tested my pin?

I give you feedback tommorow bro, because i was on the way back from my garage.

I try to program the key with SBB but i think it don‘t works. And I try to find the UCH to read the Eeprom. I think its 93C66 but i have to look first.

Thank you all for Help Bro‘s!

[Louislesinge]

Hi,
This is not infrared but radio remote!
You say remote works but immo is out of order.
I think your problem could be easy fixed with Renault Clip: it should be the well known problem of UCH changing himsilf the configuration of kind of key chip (it happens when temperature is low or battery is flat). The key chip we see in your pictures is named kind "1" So please fiirst connect Clip , go to 645 (UCH), repair mode and commands, then read configuration it is certainly gone from 1"" to "2". So you olny need to change kind of antitheft from 2 to 1, that's all!
If the problem comes back quickly, you'll need to change the keys to new type "2".
Greetings,

[kennovic]

Hi,
This is not infrared but radio remote!
You say remote works but immo is out of order.
I think your problem could be easy fixed with Renault Clip: it should be the well known problem of UCH changing himsilf the configuration of kind of key chip (it happens when temperature is low or battery is flat). The key chip we see in your pictures is named kind "1" So please fiirst connect Clip , go to 645 (UCH), repair mode and commands, then read configuration it is certainly gone from 1"" to "2". So you olny need to change kind of antitheft from 2 to 1, that's all!
If the problem comes back quickly, you'll need to change the keys to new type "2".
Greetings,


Thank you for Help Louislesinge.

It is nice that we can help other people with the same problems too.
I don‘t have the Renault CAN Clip. I try to post the Eeprom from UCH. I hope it‘s a normal eeprom like 24cxx, 93cxx or same, because i can solder out the SMD, post the file here and hope to get help. (I hope too much i know 😃)

many thanksss good bros!!! 👍🏼👍🏼👍🏼👍🏼

[Louislesinge]

Hi,
Again, you are loosing your time, if UCH went configurated itself as kind "2" you won't learn NO key like the one you show in picture as this kind of keys are "1" .
You better find someone to help with a Clip tool.
Greetings,

[Stopro92]

Louislesinge was right, I also had this problem once

[kennovic]

BIG THANKS!!!!

[Louislesinge]

Hi,
Pin is 36334663 but learning key won't work if UCH went from kind 1 to kind 2!
Greetings,

[kennovic]

I have to do a other Car now. I´ll give Feedback as soon as possible.

Nice bros. Thank you so much!