Ford Focus C-Max 2005 PATS Key Programming problems NEED HELP!!!!

[AndrewStone]

Hi guy come to me car FORD Focus C-Max 2005 with key adding, made Fords without problem. but here is real problem, situation is this one!
Client in car have 3 keys i'm deleted it, and trying to write back 2 keys, first key after delete go in ok, but second non, immo programming problem, then i'm again deleted key, programming keys again but now, programming first that key number 2 and it's programming but now key what was programm before like number 1 now like number 2 don't work, spend some 4h on it, and decide to remove dash and programm keys via dump (Tango) add 2 keys to dump, all good tango says keys in possition, after put back dashboard car won't start, immo light on! in Engine ECU get DTC P1266 Immo ID Missmatch, and in immo wrong transponder our key. what a hell. ok after that i'm found dump of this dash, with 2 keys, added again 2 keys, now in immo we have 4keys. dump keys and my keys(Added) going to car but again no luck, what a hell? maybe some one can help me?

[comizelu]

Well...
What tools are you using to program keys?
You used tango clone to add the keys by dump.

Sent from my MI MAX 3 using Tapatalk

[AndrewStone]

Well...
What tools are you using to program keys?
You used tango clone to add the keys by dump.

Sent from my MI MAX 3 using Tapatalk
I’m using forscan extended license, and tango yes flyclone, I have no ideas anymore

[comizelu]

Learn one key and the rest clone..


Sent from my MI MAX 3 using Tapatalk

[godfathertre]

Have you done pats relearn or syncronization if not it will not work the keys that could not be added are you sure they are not Cloned keys with the same id.

[AndrewStone]

Have you done pats relearn or syncronization if not it will not work the keys that could not be added are you sure they are not Cloned keys with the same id.
It’s not, I’m using new transponders

[AndrewStone]

Learn one key and the rest clone..


Sent from my MI MAX 3 using Tapatalk
Pats will only start to work if 2 keys in memory, one key not will work! And also i have in PCM some DTC about Immo ID Mismatch

[godfathertre]

Have you checked plug from dash make sure is seated correctly are you using 40 bit id 63 or 80 bit id 63 keys.

[AndrewStone]

Have you checked plug from dash make sure is seated correctly are you using 40 bit id 63 or 80 bit id 63 keys.
yes plug is ok, i'm using 4D63 40 bit

[R2D2R2]

never delete keys on ford , just add key , one seconde job !
or clone for id63 40bit ...
Sorry but your car is dead

[rapidlocksmiths]

try a pats reset rematching system

[AndrewStone]

never delete keys on ford , just add key , one seconde job !
or clone for id63 40bit ...
Sorry but your car is dead
I’m done some car like this some weeks ago, and add 3 new keys, and delete all old

[AndrewStone]

try a pats reset rematching system
With tool can do this?

[AndrewStone]

Hey who have some ideas?

[rapidlocksmiths]

ids , ad100 pro/smart pro , abrites , probably fvdi too

[AndrewStone]

Thnx to all, problem solved! this car was killing me, problem on the pic! after this all done with Forscan, ECU maching and etc, and all keys lost adding!

[R2D2R2]

OK ! SABOTAGE ...

[AndrewStone]

OK ! SABOTAGE ...
So all keys delete it's normal for ford, if need to rematch ECUs :)

[godfathertre]

What have you done you dismantled
A lot of pats if you read my post and done pats relearn and resyncronization
That would have been all solved and last
Start pressing thanks button.