Passat b6 adapting steering lock on

[tmkz]

Hi Passat B6, i try adapt new ESL from dealer.
I have a PIN for car and it looks good, Engine ECU accepting it, Comfort Module same pin code.
but when going into 25-Immobilizer and trying:

1. Adaptations, channel 0 read, save 0
2. Security access - PIN ......

there is a Error 22: Requiment not met or wrong sequence and can't adapt new ESL.
What am i doing wrong?

i wait 255min LOCK TIME IMMO, now LOCK TIME 0.

thanks!

[brend]

Im long time ago have same trable with esl adaptation and I have sulution for this...........;)

Put original esl back then turn ignition on go ccm put login ,after login successfully done don't turn ignition off and replace esl by new one and go adaptation !
With vcds its work!Tryed many times!

[tmkz]

when i put original esl no ignition... communication ok, pin, error 22, maybe corrupted eeprom comfort?

[Mr BLACK]

if you remove cover ... there is a mecanic lock on elv ...remove cover an make elv to work one time to do your job

[brend]

Wait securyti time and try agane.


when i put original esl no ignition... communication ok, pin, error 22, maybe corrupted eeprom comfort?

[tmkz]

ok, thanks, but when i calculate cs my program say ERROR DECODING CS.... maybe my comfort is bad

I wait 255 old elv, new elv, error 22. when i write pin 28234 lock time 40.

[tmkz]

need pin, cs.

[tunelab]

VIN:WVWZZZ3CZ6E021269
Immo ID:VWZCZ000000000
CS:1386B79A270D6
MAC:54722913
PIN:28234
Power Class:FE
ELV:BDAC
CCM Status:06
Key Count:02
Key1:9532119F
Key2:A07FC5CF

[tmkz]

now pin code accept, but chanel 51 when i write old pin..... wait.... NOT OK

[tmkz]

my car start.....but escl not work.... :itsme:

[tmkz]

solved, thanks all, brend your procedure is OK, tunelab pin cs ok, thanks!

[H2Deetoo]

Yes, always decrypt CCM by powering it with old ELV attached.
(Only if your old ELV is completely dead or missing then you have a bigger problem ...)

[brend]

Press magic button for more power.........:bounce:;)

solved, thanks all, brend your procedure is OK, tunelab pin cs ok, thanks!

[TESTASTRETTA]

Is it then possible to adapt new steering lock without old one? I do not have old and need adapt new...

[dimon9555]

Is it then possible to adapt new steering lock without old one? I do not have old and need adapt new...

no problem

[TESTASTRETTA]

So what is the method then? Becase as i am reading here nobody made it with vcds without help of old one.

[dimon9555]

method not free! I make a dump, everything is attached to it by the VCDS by pressing 2 buttons, the car immediately starts up without any abrituses, online, VVDI,............

[TESTASTRETTA]

Is it dump to the lock modul or to the comfort module?

[fufkin]

Hello
Can someone help adapt new elv for passat b6 without old one ?

[Ungureanu drago]

can someone help me with the pin code I want to make an adaptation to the esl module I can't find it even with abrites edc17

[gttuning]

can someone help me with the pin code I want to make an adaptation to the esl module I can't find it even with abrites edc17Abrites can do it easily man.
If you struggle take ccm out and post the dump..

Sent from my SM-G955F using Tapatalk

[Ungureanu drago]

Helo you can help mee with pin code to adapting the esl lock module please ?

[gttuning]

Helo you can help mee with pin code to adapting the esl lock module please ?Read ccm eeprom 95320 post on forum and you get pin ..
After that program by obd.

Sent from my SM-G955F using Tapatalk

[Ungureanu drago]

can you tell me with what i can read the eeprom from the comfort module please, I'm not a specialist I'm basic

[Ungureanu drago]

I'm trying with carprog is it ok?

[gttuning]

can you tell me with what i can read the eeprom from the comfort module please, I'm not a specialist I'm basicWith a eeprom programer


I think you need to ask someone to do it for you with knowledge you have at this moment.
It be safer for you ..

Sent from my SM-G955F using Tapatalk

[Ungureanu drago]

I went ccm today he gave me the access code I waited 250 minutes I tried to log in I still can't figure out what to do? to disassemble the car computer and take it out to read the dump

[Ungureanu drago]

I rezolve the problem with the car i change the ccm and cips from key and new stering lock pff i never put second hand stering lock …