gtolf 3 immo problem

[ezenigbo]

i have one vw golf3,i tried to program new key,after programming,if i check no. of keys programmed, it will be 0 or somtimes 126,and i used correct vag 33 chip and correct pin code 1596.what is the problem?attached is the dump from immo box

[lupu_sandu]

I never succeed make keys through OBD2.
Only with gambit2 or i make immo off in dump.
Check file attached, no key needed.

[ezenigbo]

when key lost for any golf3 and i copy the above dump in the immo box ,will the car start without transponder and programming?

[lupu_sandu]

For file attached, no need for key to start the car.
If you put file for another im*obox, you need to reset your im*obox to match with ECU.
Using VCDS:
Imobiliser25>Adaption>Channel00>Read>Save>Go back>Close Controler.
Ignition Off for ~ 1min and you are done.