Expert Benz help!

[gtcricardo]

Hi i need some advice from you mate
I have an Mercedes benz 2002 w203
With eis dead really dead no communication even when i desolder both mcu
I bought a new (used) one i made renew with vvdimb and try to add kay but no success
How can i made eis work?
Thank you for your help and I will press both bottom

[KriptoKey]

The work is a bit complicated for your case. If you have no reading of the original EZS, but if you can read the original EZS you can create an original FBS file, what you can do is get the EZS password that you have imported and then create an FBS file, once you have a password you can do virgin the imported EZS, then customize it with the FBS of the vehicle's original EZS.
In any case you need to clone with the ezs with programmer on bench.

[gtcricardo]

I can read password on ecu if i change it directly in ezs
After renew i can add key and car should start...?

[KriptoKey]

If you do not have an FBS file of the original EZS, then you will be a more tedious and complicated job. You need to make virgin ecu motor and ELV




I can read password on ecu if i change it directly in ezs
After renew i can add key and car should start...?