Yamaha yzf 2008 help pls

[honingkoning]

Guys i think i corrupted my file, first i tried to read it in circuit with uusp, no succes so i removed display and read/mod write file.
now dash is acting strange.
i think i corrupted the eep (L56) could someone check and repair or upload a good dump.

ori was 36165 new 29500.

i powered it up by putting 12v on pin 1 en 2 gnd on pin 12.

btw why cant i read it in circuit, uusp does not give any error but reads only fffffffffffffff

i connected 1/2/3/4/5 en 8 like in enigma manual.

[honingkoning]

This is printed on the back https://uploads.tapatalk-cdn.com/20190416/e3d1935f6be839abd20a9b7281a5efa3.jpg

[frankrayk]

Show a photo of the front panel.

[honingkoning]

Here it ishttps://uploads.tapatalk-cdn.com/20190416/d500c2732068da242fb44b5ec46f4675.jpg

[frankrayk]

Guys i think i corrupted my file, first i tried to read it in circuit with uusp, no succes so i removed display and read/mod write file.
now dash is acting strange.
i think i corrupted the eep (L56) could someone check and repair or upload a good dump.

ori was 36165 new 29500.

i powered it up by putting 12v on pin 1 en 2 gnd on pin 12.

btw why cant i read it in circuit, uusp does not give any error but reads only fffffffffffffff

i connected 1/2/3/4/5 en 8 like in enigma manual.

Test e report, I always read on the circuit and I never had a problem.
612841

[honingkoning]

Test e report, I always read on the circuit and I never had a problem.
612841Thank you I will test this tommorow, is there immo related to the dash?

Wbr Adam.

[frankrayk]

Thank you I will test this tommorow, is there immo related to the dash?

Wbr Adam.

Not immo......

[honingkoning]

Test e report, I always read on the circuit and I never had a problem.
612841What tool you read it? Still can't read the eep in circuit.

It reads all 000000 but all voltages are OK.

Wbr

[frankrayk]

What tool you read it? Still can't read the eep in circuit.

It reads all 000000 but all voltages are OK.

Wbr

UPA original 2,7V

[honingkoning]

UPA original 2,7VWhy is pin 5 listed 2 times?

[frankrayk]

Why is pin 5 listed 2 times?

You can choose either one, which you find easier to weld.

[Kocta]

Carprog, Orange 5......

[honingkoning]

You can choose either one, which you find easier to weld.Dash alive again, Thanks.
Only tool that reads writes correct was digi clone.

Thanks a lot.