2005 Nissan Micra K12 all keys lost

[mlwila]

Hi Dear
I have Nissan Micra K12 2005 all keys lost the original key was with remote 2 button and ID 46.
I trying to program key by T300 with glove box pin code 12 code but not program at all.
Can you please help me to program the car key with which tool use to program and the chip type.
Pictures of glovebox , BCM lable , BCM plugs and original key picture
But we don't have original key just need to program chip with normal key.
Thankshttps://uploads.tapatalk-cdn.com/20190419/96f64382d3c77f6b0d3fb69a937a5f2c.jpghttps://uploads.tapatalk-cdn.com/20190419/9e3686cee16f9d5af88b17c9de32ab12.jpghttps://uploads.tapatalk-cdn.com/20190419/399eb6f84e3cb8841e5fd1db5738774f.jpghttps://uploads.tapatalk-cdn.com/20190419/1093934b29addec77d0f88179278c0cc.jpg

Sent from my BV9600Pro using Tapatalk

[newone]

you must program remote key,car does not accept pcf7936

[mlwila]

you must program remote key,car does not accept pcf7936Remote key with pcf7946 can be unlocked I have used one

Sent from my BV9600Pro using Tapatalk

[P&D]

Nissan Micra 2005 can be 2 keys types

Key 2 .https://www.nwkeys.co.uk/Product/nissan-285e3-ax605-2-button-proximity-remote-micra-etc-03-12

key 1 which you have in the 1st post

key 1
Nissan Micra K12 28268AX600 11.2002-05.2005
Nissan Miicra K12 28268AX61A 07.2006-2010 (end of K12 production)
Nissan Note E11 28268AX61A 01.2006-12.2008
Nissan Pathfinder 01.2005-09.2006 (without intelligent key system)
Nissan Qashqai J10 28268AX61A 12.2006-01.2010

[mlwila]

Nissan Micra 2005 can be 2 keys types

Key 2 .https://www.nwkeys.co.uk/Product/nissan-285e3-ax605-2-button-proximity-remote-micra-etc-03-12

key 1 which you have in the 1st post

key 1
Nissan Micra K12 28268AX600 11.2002-05.2005
Nissan Miicra K12 28268AX61A 07.2006-2010 (end of K12 production)
Nissan Note E11 28268AX61A 01.2006-12.2008
Nissan Pathfinder 01.2005-09.2006 (without intelligent key system)
Nissan Qashqai J10 28268AX61A 12.2006-01.2010
My car is key 1 not keyless one can program pcf7936 to run car or need pcf7946 to work

Sent from my BV9600Pro using Tapatalk

[castin]

Meybe Tango add pcf7936, but by obd must use pcf7946. Im learn key by use sbb and pin code, but remote not work. Im try use different precode - no succes. Car start ok.

[rojhat]

Remote key with pcf7946 can be unlocked I have used one

Sent from my BV9600Pro using Tapatalkhi just replace 7946 new and precode it . finish

Envoyé de mon SM-A605FN en utilisant Tapatalk

[mlwila]

Meybe Tango add pcf7936, but by obd must use pcf7946. Im learn key by use sbb and pin code, but remote not work. Im try use different precode - no succes. Car start ok.I am try to read eeprom 95080 on BCM and write key with tango but car not start and the light security still flashing.
So how can make the key without having the original key

Sent from my BV9600Pro using Tapatalk

[P&D]

I am try to read eeprom 95080 on BCM and write key with tango but car not start and the light security still flashing.
So how can make the key without having the original key

Sent from my BV9600Pro using Tapatalk


As rojhat says

hi just replace 7946 new and precode it . then program to car


Meybe Tango add pcf7936, but by obd must use pcf7946. Im learn key by use sbb and pin code, but remote not work. Im try use different precode - no succes. Car start ok.

Pre code in Zedbull clone software & Effi

[swq123]

you must use pcf7946. tango make pcf7936 but car can't start. with remote no problems

Wysłane z mojego SM-G920F przy użyciu Tapatalka

[mlwila]

you must use pcf7946. tango make pcf7936 but car can't start. with remote no problems

Wysłane z mojego SM-G920F przy użyciu TapatalkaCan I use the NB remote for vvdi key tool with pcf and generate the chip and remote as well can be programmed

Sent from my BV9600Pro using Tapatalk

[mlwila]

Can I use the NB remote for vvdi key tool with pcf and generate the chip and remote as well can be programmed

Sent from my BV9600Pro using TapatalkI mean this one can use ithttps://uploads.tapatalk-cdn.com/20190419/fdaaf4b3eda5fc55379f07e779dd1d49.jpg

Sent from my BV9600Pro using Tapatalk

[mlwila]

you must use pcf7946. tango make pcf7936 but car can't start. with remote no problems

Wysłane z mojego SM-G920F przy użyciu TapatalkaThis remote can be programmed for the carhttps://uploads.tapatalk-cdn.com/20190419/8e042b600cc9feeb422c7386438f0c83.jpghttps://uploads.tapatalk-cdn.com/20190419/f6b2b0ea9b5bc20a107c0d07215f8f9f.jpghttps://uploads.tapatalk-cdn.com/20190419/b590ef77ff01a932c94e5a54c2f02092.jpg

Sent from my BV9600Pro using Tapatalk

[newone]

yes,if you use nb remote and program from obd everything will work ok

[mlwila]

yes,if you use nb remote and program from obd everything will work okCan program it with tango also

Sent from my BV9600Pro using Tapatalk

[newone]

no,only from obd