PDA

View Full Version : Renault Kangoo I**O trouble



craul4
17th December, 2009, 10:12 PM
Hi I have an Renault Kangoo ,1,9 ,year 2005 , ECU DCU3R with 95080 eeprom , I**O box with MC33690DW ,and is not starting with Both keys .I used I**O KILLER and I modified the dump of the 95080 eeprom ,but is not working . Please help with solution .

hamza338
18th December, 2009, 01:22 AM
Remove immo/Soft (ImmoKiller 1.0)
2.25080 Programm. Record Write Protect Bits.All Protect(11).Set the protection on the record

gezame
18th December, 2009, 01:49 AM
Hi,
modified the dump of the 95080 im**killer, "immo remove" not "repair".
Cut pin 20.
Regards.

craul4
18th December, 2009, 07:05 AM
don't understand " Record Write Protect Bits.All Protect(11).Set the protection on the record"
................ and what pin 20 to cut ? please reply!!!!

hamza338
20th December, 2009, 03:11 PM
programme your dumps with im*o killer after click the button protect memory

lucianica
20th December, 2009, 08:52 PM
hello
i know few solutions

1 remove 95080 from board,car will start but if you have AC and servo,will not work after that
2 make im*o off,and activate WP(write protect),is pin 3
remove pin 3 from board and conect to pin 4.make shure about 95080,not all have WP function
3 best solution,make ecu virgin and put emulator

if someone know other solutins,please post here
regards

synkrotronic
26th December, 2009, 11:05 AM
Hi
You could try to resold the contacts of eprom on the two keys,usuly could make bad contacts.After you could need to syncronize.

See if helps... Regards

synkrotronic
26th December, 2009, 11:09 AM
The keys have remote control ?

They lock and unlock doors ?

Regards

lissbox
23rd January, 2010, 05:15 PM
RECU DCU3R
Dump 25080 memory, Remove immo(ImmoKiller 1.0) + !!! 25080 Programm Write All Protect(11)(Write Protection ban processor again write immo 25080)
Engine start!:)
Write Protect Bits (0-13)

Meat-Head
12th March, 2010, 07:27 PM
hello
i know few solutions

1 remove 95080 from board,car will start but if you have AC and servo,will not work after that



M-H-M Recently got involvred in one of these bags of crap,
yes it starts and runs, but still needs road test.


http://rodneymiedler.files.wordpress.com/2009/06/myth-confirmed1.jpg

Meat-Head
26th March, 2010, 07:20 PM
BUMP

YES done another one, thank to Digital Kaos, a customer from Poland can now ~~~~ off back and take his empty wallet with him.

From starting job to trying to start engine 12 Mins including poking the relay that was at fault (oops)

I love DK long-time

http://rodneymiedler.files.wordpress.com/2009/06/myth-confirmed1.jpg[/QUOTE]

daviee
21st July, 2010, 09:37 AM
programme your dumps with im*o killer after click the button protect memory


Where is the button Protect memory? Can't see.I have original killer,maybe this button exists only in cracked one?

thanks