PDA

View Full Version : MB Vito DTC off need



huskypt
22nd April, 2019, 10:43 PM
Hi.
Today i turn off DTC on Mercedes Benz Vito yr2006, light on dash but no DTC on diagnostic

DTC removed:


P2134


regards

huskypt
23rd April, 2019, 03:17 PM
if possible remove only dtc P2134 MAN error

bobolin4o
23rd April, 2019, 03:24 PM
What is this - faulty TVA???
If yes... simple DTC off not work here, you need completely removed TVA from software, or... new TVA, of course.

huskypt
23rd April, 2019, 04:12 PM
What is this - faulty TVA???
If yes... simple DTC off not work here, you need completely removed TVA from software, or... new TVA, of course.

Error is P2134 Glow Plug Failure Cylinder but mil engine is off... Glow mil ligh is on.... i need remove

( on diagnostic generic no apear error) but with Delphi 150 apear that error

eculevel
23rd April, 2019, 07:18 PM
Error is P2134 Glow Plug Failure Cylinder but mil engine is off... Glow mil ligh is on.... i need remove

( on diagnostic generic no apear error) but with Delphi 150 apear that error

P2134 = throttle/pedal position sensor/switch F circuit intermittent

huskypt
24th April, 2019, 09:11 AM
P2134 = throttle/pedal position sensor/switch F circuit intermittent

P2134 are manufacturer specific mercedes P-codes for glow plugs from 2 cyl . It is the only fault in the engine. Glow plug ia snapped and left inside.

bobolin4o
25th April, 2019, 09:58 AM
You can test this file.
The checksum is not calculated...

huskypt
25th April, 2019, 10:53 AM
You can test this file.
The checksum is not calculated...

Hi friend [emoji4]
I will try and report