PDA

View Full Version : Fiat Doblo MJD8F3 DPF & EGR OFF help



bluekrash
23rd April, 2019, 09:51 PM
Hello
I was trying to dpf & egr off solution on Fiat DobloMJD8F3 MJ8F3HW1FP 2442D330. I tried with some tools with different results.

DPF & EGR 2017.05 got limp mode after about 10km

ASC DPF & EGR 3.0 (02-2016), work perfect, but after about 200km I got DTC P2002 and P1564, I can deleted with tool (DTC REMOVER) but still limited at 3.000rpm.

I was reading this ECU can be done with any tool, and need to be manually, but I can't find the map for this ecu or the hex sequence to find manually in winols.



any help will be really appreciated.

PD: I reset dpf values with FES before write the file.

Dietrich
24th April, 2019, 10:09 AM
If you are making like this, reset ash level with fes on ori file, disconnect dif.pressure sensor+temperature sensors on dpf, kill dtc and use aes remover.

pike
24th April, 2019, 02:24 PM
or need working DPF EGR off solution made by hand.

HIC
24th April, 2019, 07:02 PM
Still need mod file ?

bluekrash
25th April, 2019, 01:58 AM
after bought a mod file from experienced user (manually by winols), we detected that the problem are in the RESET DPF VALUES (dpf replace step before write). At the first time i was using FES 3.9 but I notice that FES don't set to 0 of the clogging level, neither Distance travelled with dpf warning indicator ON. So, today I tried with LAUNCH FIAT V35 (with ORI FILE & mod file) without result, I got a OPERATION FAILED and FORCE REGEN is causing a failure.

anyone know how to reset the values?.

bluekrash
25th April, 2019, 01:59 AM
or need working DPF EGR off solution made by hand.

thank you captain obvious for you invaluable help in the community.

pike
25th April, 2019, 03:37 AM
what soot value now?

Mk5TDI
6th May, 2019, 04:38 AM
Hello
I was trying to dpf & egr off solution on Fiat DobloMJD8F3 MJ8F3HW1FP 2442D330. I tried with some tools with different results.

DPF & EGR 2017.05 got limp mode after about 10km

ASC DPF & EGR 3.0 (02-2016), work perfect, but after about 200km I got DTC P2002 and P1564, I can deleted with tool (DTC REMOVER) but still limited at 3.000rpm.

I was reading this ECU can be done with any tool, and need to be manually, but I can't find the map for this ecu or the hex sequence to find manually in winols.



any help will be really appreciated.

PD: I reset dpf values with FES before write the file.


passw PM test and report please