Duleee
24th April, 2019, 10:23 AM
Hello guys i have a problem with dpf off on this engine, after dpf off i have white smoke on exhaust, i done next:
Turned dpf by the switch on 1D0F20 and zeroed three maps 7x12 after tubo maps "delayed effective matrix for the consideration of the engine operating state during the regeneration"
All three connectors from the sensors are disconnected, also egr is closed by three hysteresis maps and physically closed.
Also tried swiftec solution which does dpf switch off, limp mode off and one lambda switch to 02 on 1eee1c.
In any case i have a white smoke on exhaust and smell like regeneration
Injectors are tested and they are good
Somebody have some idea what did i miss..?
Ori and mod are attached
Best Regards
Turned dpf by the switch on 1D0F20 and zeroed three maps 7x12 after tubo maps "delayed effective matrix for the consideration of the engine operating state during the regeneration"
All three connectors from the sensors are disconnected, also egr is closed by three hysteresis maps and physically closed.
Also tried swiftec solution which does dpf switch off, limp mode off and one lambda switch to 02 on 1eee1c.
In any case i have a white smoke on exhaust and smell like regeneration
Injectors are tested and they are good
Somebody have some idea what did i miss..?
Ori and mod are attached
Best Regards