subaru XV 2012- smart key all keys lost

[Nassreddine84]

hi mates i need urgent help with subaru XV 2012 all keys lost i removed first bcm behind fuse box and read eeprom 24c02 tried to make chip but ignition couldnt switch on then found the right smart ecu unit read eeprom 93c86 tried to make key by dump ignnition switched on successfully remote worked and keyless worked but engine couldnt start removed steering lock 93c46 eeprom and did verginize plus smart ecu 93c86 verginize also failed to switch on removed the whole dashboard looking for id box but this car was not equipped with id box i am going crazy with this subaru need ur help mates anyone got same this issue before thanks in advanced
below are the whole dumps original and vergin files
question is there vergin file for bcm and if no id code where should be the syncroizing unit is it in the dashboard mates if anyone can help would be thankful best regards

[achaccha]

I see that your original files are fine, you may have some problem with the ecu of the engine, possibly desynchronized.
I want to ask you to explain well what happens after you have programmed a key that opens and closes the doors with the remote.
when you try to start the engine it turns and turns but it does not start?
explain please
Please read engine ecu and post.
It would also be good image of each component or in any case part number of each
i wait

[Nassreddine84]

I see that your original files are fine, you may have some problem with the ecu of the engine, possibly desynchronized.
I want to ask you to explain well what happens after you have programmed a key that opens and closes the doors with the remote.
when you try to start the engine it turns and turns but it does not start?
explain please
Please read engine ecu and post.
It would also be good image of each component or in any case part number of each
i wait

dear mate after programming the key car switches on keyless function ok but car does not crank and security light keeps solid this what happened

[achaccha]

Read the engine ecu and post the file here

[Nassreddine84]

Read the engine ecu and post the file here

https://uploads.tapatalk-cdn.com/20190427/76d1a99ffcad31230484eab8b978f468.jpghttps://uploads.tapatalk-cdn.com/20190427/a8d655f86f1c99573a0c3ba48ede43c5.jpghttps://uploads.tapatalk-cdn.com/20190427/ede60e642d7308e199d8a64a7356cd72.jpg
Here is the ecu pictures and eeprom 93C56 eeprom will upload data now



Sent from my iPhone using Tapatalk

[Nassreddine84]

here is ecu data eeprom 93c56

[Nassreddine84]

Read the engine ecu and post the file here

please mate i am still waiting your reply can u please checkthe ecu data i already post the eeprom thank u

[drugowaz]

Bcm is for regular keys,not for smart keys. If you have bcm its not smart system its G key. Smart system is totaly diferent ,and you will not make fully working smart key by dump

[Nassreddine84]

Yes mate i understand i read smart unit ecu and tried to make key from dump 93c86 and also failed so what do u suggest


Sent from my iPhone using Tapatalk

[drugowaz]

Suggest give away job to those who have better understanding and tools