BMW E60 550i ME9.2

[n1kson]

Hello,

i have read bin from this ECU with BDM100 and ktag. Want to do this things:

1) Rear O2 sensor disable
2) Ignition advance ~2 degree
3) Exhaust pops (burbles)

PM for price.

Bin file is attached.

[FlashTune]

Hello,

i have read bin from this ECU with BDM100 and ktag. Want to do this things:

1) Rear O2 sensor disable
2) Ignition advance ~2 degree
3) Exhaust pops (burbles)

PM for price.

Bin file is attached.


here your Request.

regards

[n1kson]

Can someone help for 50 EUR? Flashtune is asking 165.

[FlashTune]

N1kson want to buy a Ferrari for €50 euro hahah but the dealer ask 100000 euro hahahahah wired people here.... a 550i engine but want to spend only 50 euri whahahahahaha

this is also a guy that will drive a ferrari but his Tank is always amty :)

[n1kson]

N1kson want to buy a Ferrari for €50 euro hahah but the dealer ask 100000 euro hahahahah wired people here.... a 550i engine but want to spend only 50 euri whahahahahaha

this is also a guy that will drive a ferrari but his Tank is always amty :)

Haaaaah.. Braaavo Braaavoo you are very funny guy ;) Please Pleease don't talk that funny things, can't stop laughing)) By your logic, if you say to me 999 Euro i have to pay it for you? And if i tell you that 999 euro is very expensive and do that for me for 700 Euro means that i want Ferrari for 700 Euro? I have done read/write process and asking only 3 things because i have no damos or definition of me9.2. It's max 10 minutes deal to do that and if you think that 50 Euro is not enough for this forum member then adios!

[FlashTune]

Haaaaah.. Braaavo Braaavoo you are very funny guy ;) Please Pleease don't talk that funny things, can't stop laughing)) By your logic, if you say to me 999 Euro i have to pay it for you? And if i tell you that 999 euro is very expensive and do that for me for 700 Euro means that i want Ferrari for 700 Euro? I have done read/write process and asking only 3 things because i have no damos or definition of me9.2. It's max 10 minutes deal to do that and if you think that 50 Euro is not enough for this forum member then adios!


look tuners hwat n1kson says:

It's max 10 minutes deal to do that



if its max 10 min why you dont do it????????

[n1kson]

look tuners hwat n1kson says:

It's max 10 minutes deal to do that



if its max 10 min why you dont do it????????

you are reading only what you want to read?


i have no damos or definition of me9.2. It's max 10 minutes deal to do

If i have damos, i will do that in 10 minutes. Lambda logic, ignition +2 degree, overrun cutoff + ignition retard on decceleration. BUT! because i have no damos or xdf def i am asking for that thing and paying 50 Euros, i don't think that it's bad price ;) For me, your price is too expensive, someone PM-d me that is ready to do for 50 Eu but he don't know how to do burbles and because of that im waiting for other variants.

[camouflaged]

i will steal this thread.. can somebody tell me if is it possible to read complete sw from this DME ME9.2 ecu engine n62b48 bmw 750i 2008 with VVDI prog? or do I have to buy the bdm100 tool ? i could really understand where is the pin 53 for the extra voltage.

thank you

//edit; Is the pinout for MPPS same as for BDM100? if not can anybody help how o read the me9.2 with mpps clone?
thank you

[VollPower]

direct on ecu
Pin 32 = Kline T1 -Pin 7 12volt T4 Pin 26 = 12 volt T1 Pin 4 = Ground

BDM just connect Bosch pad 12volt on tool and read

[alonedark]

voll my `pass for md1 please

[camouflaged]

direct on ecu
Pin 32 = Kline T1 -Pin 7 12volt T4 Pin 26 = 12 volt T1 Pin 4 = Ground

BDM just connect Bosch pad 12volt on tool and read

Sorry, still confused. Can i use VVDI prog or MPPS? Coz I have found the pinout scheme,
916896

but the VVDI ecu adapter has also canH canL wires, i think via k-line it will be very slow, anyway the option n62 engin is not in the list, does it matter?

916898
916899


but i have also find this pinout..with can pins, which i suppose should be faster but nut sure if this is valid for me9.2 ecu :
916901