Nissan Qashqai no start.

[kophiphi]

Hi there,

There's a Nissan Qashqai 2006, 2.0 d, edc16cp33.
I would have removed the dpf from this car. With galetto via obd. read was good, flash and injector code o.k.
Unfortunately the car can be started only keyless.
I was stupid, didn't take the key into the igniton switch during writing. So the eprom is K.O.....
Car doesn't start, there're 3 faulties codes: P1611- ID dicard imm-ecm, P0611- Fuel ionjector control module Performance, P1610- Lock mode/nats.

Question: If I red the key from bcm with Abritus, calculate a pin, reinstall the old keys the car will start again and the keyless modul will work again? Or shall I syncronise the bcm and the ecu?

Thanks for help!!
F

[morgano]

Try this.

Put key physically in ignition, take read with galletto thru obd and write again the same file with the key in the ignition.

You may be lucky and all be working again.

[kophiphi]

....solved....

[ivanmihov]

how,it's important for everyone to know how this situation can be solved,did you use method that Morgano told you

[enagize91]

how did you solve this problem, i now have same problem