PDA

View Full Version : range rover evoque no ignition



Moe1988
2nd May, 2019, 09:52 AM
this car turned on and drove for 2 meters then shut down completely ..
both keys are working ( locking- unlocking ) but no ignition whatsoever ...
checked fuses nothing bad
diag cant communicate with any of the main ecus
only communicate with seats radio liftgate and rfa ...

car completly dead ... battery voltage is good
tried forcing ignition on with sdd ( using the verify keys function the tool turn ignition on by itself ) also nothing

anyone has any idea ????

iamfooser
2nd May, 2019, 02:03 PM
Any fault in rfa? I think problem with shifter.

Sent from my SM-G970F using Tapatalk

Moe1988
2nd May, 2019, 04:13 PM
Car was working fine. Just drove for 2 meters in reverse in the parking and turned off by itself...
I am towing the car back to my shop..
No faults in any modules that I read. Rfa had no faults whatsoever..
Can a blocked kvm do this?

Sent from my JKM-LX1 using Tapatalk

Moe1988
2nd May, 2019, 04:50 PM
The KVM is the RFA, you can see the RFA on your diag.

If RFA was locked you would not be able to programme keys, would not stop getting ignition.

Have you tried a 10mm spanner to do a battery reset, this fixes a lot of issues :)

JoKHahaha first thing I tried

Sent from my JKM-LX1 using Tapatalk

ray-ray
2nd May, 2019, 04:56 PM
Maybe there a crank sensor that kill the engine.( Safe mode )

super jumbe
2nd May, 2019, 09:01 PM
This could be a stupid question to ask is the battery fully charged.

Moe1988
3rd May, 2019, 08:45 AM
crank sensor would not make engine turn but it would turn ignition on ... hahahah and yes it is fully charged ..
well guy decided to take car to dealership . its going to be fun to see their quote :D :D .. anyways im still communicating with him so ill know what happens with the car ... ill post any updates here

thanks guys

super jumbe
3rd May, 2019, 11:19 AM
crank sensor would not make engine turn but it would turn ignition on ... hahahah and yes it is fully charged ..
well guy decided to take car to dealership . its going to be fun to see their quote :D :D .. anyways im still communicating with him so ill know what happens with the car ... ill post any updates here

thanks guys

Please update we need to know.

Moe1988
14th May, 2019, 05:33 PM
Hey guys so car stayed for a whole day at dealership .. said there was a burnt line .. and charged 300$ .. hhahaa honestly i did not buy it . These guys are liars .

Sent from my JKM-LX1 using Tapatalk

Manta1600
15th May, 2019, 08:31 AM
Maybe they are liars but I think that is better to pay if they can give you promise that car will work

JoK told you to check some resistance - Did you check them?

Moe1988
1st June, 2019, 03:35 PM
I did not bro . I was going to when the car is towed to my shop . But customer towed it to dealership instead.

Sent from my JKM-LX1 using Tapatalk