PDA

View Full Version : VAG delphi DCM3.7 by Kess V2 OBD



FlashTune
2nd May, 2019, 02:02 PM
VW Polo 1.2TDI DELPHI DCM3.7




1. I did ECU ID all OK :)

2. I did ECU READING ..... all OK :)

3. then correct checksum by winols,ecm,swift

4. write Back File .... All OK :)


USE protocol : Sang Young 2.0DXI DELPHI DCM3.7
Chevrolet DCM3.7


check the ECU ID ;)

Good luck Guys!!!

jameshal18
8th May, 2019, 10:41 AM
What Kess?
Kess v2 clone? 5.017?

Thanks

sdtsedat
8th May, 2019, 11:14 AM
So you use protocol from ssangyong to read/write delphi dcm3.7 VAG?

gueswhat
12th May, 2019, 05:29 PM
VW Polo 1.2TDI DELPHI DCM3.7




1. I did ECU ID all OK :)

2. I did ECU READING ..... all OK :)

3. then correct checksum by winols,ecm,swift

4. write Back File .... All OK :)


USE protocol : Sang Young 2.0DXI DELPHI DCM3.7
Chevrolet DCM3.7


check the ECU ID ;)

Good luck Guys!!!

hello my friend today i tried with kess 2.47
and id reading was succesfull but when i tried to read ecu
kess say that it dont conect with the ecu i triend many time but no succes
what need i to do for read dcm 3.7 Delphi 1.2 tdi polo ecu
can some one helps me with this

thank u guys

FlashTune
12th May, 2019, 10:48 PM
use a other protocol Delphi DCM3.7 and try to read

alex0666
16th May, 2019, 08:32 PM
Hi
I have a problem, I read ecu via protocol ssanyoung dcm3.7 (coming soon), the file is ok, how do I want to write the file pops checksum error

sonic 1989
16th May, 2019, 09:25 PM
.............

sonic 1989
16th May, 2019, 09:25 PM
FlashTune (https://www.digital-kaos.co.uk/forums/member.php/607588-FlashTune) YOU CAN CORRECT CHEKSUM ???

erdilmen
24th May, 2019, 12:38 AM
VW Polo 1.2TDI DELPHI DCM3.7




1. I did ECU ID all OK :)

2. I did ECU READING ..... all OK :)

3. then correct checksum by winols,ecm,swift

4. write Back File .... All OK :)


USE protocol : Sang Young 2.0DXI DELPHI DCM3.7
Chevrolet DCM3.7


check the ECU ID ;)

Good luck Guys!!!
can u please correct my checksum ?

kospoz
5th June, 2019, 10:01 PM
I read id ok .procced to reading and when kess read it 100% said checksum error and program closed

FlashTune
5th June, 2019, 10:49 PM
i can correct it yes :)

voltekk
13th September, 2019, 02:54 PM
i can correct it yes :)
i got the same problem can you help me ?

heteromies
13th September, 2019, 10:04 PM
Kess 5.028 support this ECU.

alexbalaban
16th September, 2019, 07:45 PM
i can correct it yes :)
Can you help me too???

a500tut
16th September, 2019, 07:52 PM
Can you help me too???

Он забанен и уже никому не поможет.

voltekk
20th September, 2019, 11:07 AM
anyone else??

Truan21
9th October, 2019, 12:09 AM
I read id ok .procced to reading and when kess read it 100% said checksum error and program closedHow did you solve this? I am like you

Enviado desde mi SM-N950F mediante Tapatalk

badrdine
8th December, 2021, 04:39 PM
i have the same problem. when reading i get checksum error and when i open the file from winols it doesn't have a checksum.
i turn off the egt with davinci, but now can i write the file without problem with kess?

firarda
15th September, 2023, 11:13 PM
i have the same problem. when reading i get checksum error and when i open the file from winols it doesn't have a checksum.
i turn off the egt with davinci, but now can i write the file without problem with kess?

can you help with software