visteon dcu 102

[dashtool2016]

I have problems with ecu visteon dcu 102 in peugeot boxer 120bhp I made repair of injectors and now it does not let me do the learning of the pump is it possible to virginize and autocode? Thank you

[vladanr]

617597here you are ,this is autocoding

[dashtool2016]

the file is larger but I charge it with ktag and the car does not start with diagnosis does not have communication with the engine unit can you help me? Thank you

[vladanr]

can you write it with galeto boot mode ?file tested many times and works

[kiszka]

the file is larger but I charge it with ktag and the car does not start with diagnosis does not have communication with the engine unit can you help me? Thank you
ecu virgin ktag
press buttons
https://mega.nz/#!U6gCAQ6J

[nazaeas]

here virgin ok
recode injector ...

[dashtool2016]

Is there a way to recover the ecu by obd? I do not have the PCB's boot pin this damaged and the CNF1 is also possible with Kess or with MPPS?

[gendos89]

It cant be recovered by obd

[dashtool2016]

I have accidentally torn the entire track from the point to the other point: S can someone locate another boot point for this ecu? How can i get it back ? Thank you

[dashtool2016]

B4 and B6 I do not have these points nor is it possible to read with xprog: S

[vladanr]

618105 here is boot mode and reading by obd

[vladanr]

618105 here is boot mode and reading by obd

[dashtool2016]

I have a donor with another reference different from the version 100 cv is worth for the 120 cv ??

[dashtool2016]

I need to make the dump of the ecu donor a virgin

[kiszka]

I need to make the dump of the ecu donor a virgin
encode injectors
https://mega.nz/#!gjBRQKSZ

[dashtool2016]

can you give me the pin code of this reading please? Thank you

[dashtool2016]

pin code ??please bsi 95160 thank

[kiszka]

pin code ??please bsi 95160 thank
..... 67146 .....

[danielif]

Maiby PIN from DCU102 ST10F276 (https://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=618105&d=1557304958) is in 61D0 line in dump:
46 01 F6 E3 86 02 xx xx
If pin is 67146, open Windows calculator, write in DEC 67146 and transform in HEX, result 1064A. 10 64 is 46 01 in dump, but A ??
Mi teorie is right ?

[dashtool2016]

now I try to pair bsi and ecu but diagbox does not give me error in the programming but the light of immo is still active and the car does not start the fault codes are that ecu does not return the valid immo signal ... can you help me ??



Can you record the boot pin code for the ecu? I do not want to clone the unit because I think it had an error in the previous flash and it did not let the pump or the injectors to be programmed ...

[dashtool2016]

I already have the ecu with the files that sent me loaded and with no I can do the learning of pump and nozzles dcts me 1304 1305 and 1306 marks how can I solve this problem? the idle is unstable and the pump regulator is new and the 4 injectors are new but lexia diagbox fails in the programming

[kiszka]

...................

[kisza]

Did y managed to find out where b4 and b6 goes to I have same issue.