4runner read write vin odometer

[enriqxxx]

hello good, I corrupted my odometer reading data with tweezers. I used data from bin upload to the forum and the odometer is crazy, it goes up, down and trembles at the stops the needles.

my 4runner 2003


This is a data dump from the users here.

617615617615


my VIN
JTEZT14R940015403

[garciaefren]

You must know how to correct mileage if you lose 5 kilograms and stop increasing
your file says it has km 823276 or 194701

[enriqxxx]

thanks for answering. this bin does not look like the others of 4runner and I put it in but it goes out in 0 blinking.

when I put the bin here, it does not flicker and the mileage is editable. but the needle is all crazy. go low to the top tiemba and go down.

help to give you a kiss and something more

[enriqxxx]

that is the least. I just uploaded it as a reference and I edit it with licznik USB V4.8
TOYOTA ALLION 93C46

[enriqxxx]

need edit vin dump..

look
https://www.taninautoelectronix.com/product/2003-2009-toyota-4runner-instrument-cluster/

odometer seller edit vin and milaje

[epd1221]

I don't think vin is on cluster but milage can be edited. Whats your original file ??

[enriqxxx]

I corrupted the original file by reading it badly with a clip directly to the circuit..

watch this. sell odometer and ask for mileage and vin
https://www.taninautoelectronix.com/product/2003-2009-toyota-4runner-instrument-cluster/
odometer seller edit vin and mileage

[epd1221]

Have you try new bin file there's some here on forum ??

[enriqxxx]

yes.
yes. when placing the dump here the fault is as follows
- the average rpm needle goes up and down, the mileage needle goes up and down to 0 and then goes to maximum almost to turn around and trembles at the top. The dasboard reset odb buttons do not work and the screen blinks.

[jomberykaso]

yes.
yes. when placing the dump here the fault is as follows
- the average rpm needle goes up and down, the mileage needle goes up and down to 0 and then goes to maximum almost to turn around and trembles at the top. The dasboard reset odb buttons do not work and the screen blinks.

If you wanna get helping..Post your dump here....your original corrupted file here and a post a picture of your dash.

[enriqxxx]

My dash 4runner usa 2003 o 2004

618510
my VIN
JTEZT14R940015403


I read wrong. but he read me several times like that with the hook.

my dump corrupt
618511








the problem is not the km counter because I edit it. the problem is a unique code in it, which makes it work 100%
With the corrupt bin.
-There is a blinking km screen.
- Needles of the dead km
- Average rpm needle running


With the bin Not corrupt, but not mine
-Rare parties
-Screen km ok
-No needle works
-RPM and KM needle goes up and down. The KM climbs to the top limit trembling with the top.
-It does not work odometro buttons


I appreciate your help.:rangers2:

[enriqxxx]

thank you already resolved. this 4ruuner does not have the normal data is inverted X Y. and has no vin in use a bin of another q had done. but invest everything with the licznik48a program








my bin working
619116

Post closet

[antenor]

Try this dump ok the forum!