Log in

View Full Version : VW Transporter 2019



paulsta
7th May, 2019, 09:29 PM
What remote will work with this and is it ID48

Cheers

Sent from my Pixel 2 XL using Tapatalk

H2Deetoo
10th May, 2019, 08:57 AM
No it is ID88.

Maartinj
10th May, 2019, 10:49 AM
What remote will work with this and is it ID48

Cheers

Sent from my Pixel 2 XL using Tapatalk
7N0837202AC should work as if for 2016 up
or you can change immo data and use regular 48 in both keys (old will stop work)
but first check if you can add remote to BCM
if you can - you can try with IMMO

oknid
3rd June, 2019, 09:48 AM
Hello Maartinj,

can you tell me what I must change in immo data to use regular ID48 transponder.
Car is VW Caravelle 2017 MY.
I added remote to BCM and it works fine.
I read immo data and eprom data and I tried to code blank ID48 and precoded ID48 to VAG canbus (TP23) with no luck.
Transponder was not recognized.
I also tried to code in key for Golf 7, Megamos AES, also with no luck.
Again, key was not recognized.

My Tmpro 2 recognize transponder from original key (5K0 837 202 BH) and key for Golf 7 as Megamos AES 128 bit.

Thanks in advance,
Oknid

exe123
3rd June, 2019, 11:22 AM
https://www.digital-kaos.co.uk/forums/showthread.php/652684-Different-VAG-PQ-transponders-when-NEC-immo-starts-with-65-instead-of-21

oknid
3rd June, 2019, 12:05 PM
https://www.digital-kaos.co.uk/forums/showthread.php/652684-Different-VAG-PQ-transponders-when-NEC-immo-starts-with-65-instead-of-21

Sorry for stupid question, but where to find that config bytes?

exe123
3rd June, 2019, 12:40 PM
Most good tools show this config bytes. Don't know what tool you have used to read immodata