MB W203 SIEMENS 5WK90538 HOW TO READ?

[Panathaole]

Hi

i have to read an ecu from MB w203 siemens 5wk90538.....

it's possible with galletto? (choose TOOL BOOT MODE --> SIEMENS INFINEON C167....???)

Any photo for connection?

Thank you...

618964

sim4l KE

[mercis]

you must flash chip 29f400 read,

[Panathaole]

you must flash chip 29f400 read,
Hi...

Yes, I see that, but it's possible with galletto?
As I see many have problem to read the flash of that ecu....

The car owner, have replace the compressor (c180 143 hp) with bigger one from c230 193 hp...

He have an ecu from the c230, so I want to make the donor ecu virgin, to test it in his car.....

If that doesn't work, l try to read the original, and send for tunning....

[mercis]

i read flash with willem(soldier from board),upload dump and will virgin

[Panathaole]

i read flash with willem(soldier from board),upload dump and will virgin


thank's Mercis.....

i do not have adapter for tl866plus....

so i try to find a way to read it on board ........

as i find until now galletto can read it on pcb..... i must find how....

otherwise i order an adapter for tl866....

i am not hurry up to fix this....

619014

Is this the correct pinout?

[mercis]

yes for bootmode

[Panathaole]

hi again....

i have two problems now...

first galletto have only siemens boot for29f200/400...

619159619160

and second...

this is the correct pinout? The 100Ω -> BOOT goes to (-12v?) or in ecu cover?

619157

[Panathaole]

hi again...

i make renew the ecu 619707 with mb vvdi....

no key in ecu eeprom.... now i have no connection with the car..... fan runs if i adapt ecu... no connection with diagnosis....

i must make virgine the flash?

this is the original flash of the ecu...

619708


this is donor ecu.... i don't want to touch the original from the car......

i want to adapt this one to the car..... the original is 143hp.... and the donor (this one) is 163 hp... i need more hp....

thank you...