PDA

View Full Version : BMW F20 problem


DjRomeoR
13th May, 2019, 05:11 PM
Hello,

BMW F20 with FEM module , i tryed can filter first in cluster next in FEM but same ,when i put cluster dont show anythink.

In this cars dont work can filter ? because i tryed 6 of whem and same situation.

Me need enter correct km , but for this car i cant :/ maybe someone know how to do it ?



Thank you for help.
jetronic30
13th May, 2019, 05:35 PM
what can filter do you use? some Chinese dont work......
DjRomeoR
13th May, 2019, 05:50 PM
With this filters i do ML models some F30 - F07 and other , but this model wont work :(

i haved 10 can filters from diferrent sellers , but same all wont work :/

I used this : https://ae01.alicdn.com/kf/HTB1YWfaSFXXXXbOaXXXq6xXFXXXm/Attractive-Design-and-Efficiency-CANEMU-CAN-Filter-3-in-1-Emulator-For-BMW-Mercedes-Benz.jpg
jetronic30
13th May, 2019, 06:19 PM
With this filters i do ML models some F30 - F07 and other , but this model wont work :(

i haved 10 can filters from diferrent sellers , but same all wont work :/

I used this : https://ae01.alicdn.com/kf/HTB1YWfaSFXXXXbOaXXXq6xXFXXXm/Attractive-Design-and-Efficiency-CANEMU-CAN-Filter-3-in-1-Emulator-For-BMW-Mercedes-Benz.jpg

I had the same problem, I bought another chinese one and it was ok
DjRomeoR
13th May, 2019, 07:59 PM
I had the same problem, I bought another chinese one and it was ok

maybe are some tool who can do fem module without can filter?
jetronic30
13th May, 2019, 08:26 PM
maybe are some tool who can do fem module without can filter?

VVDI.................
smartymarti
13th May, 2019, 08:49 PM
maybe are some tool who can do fem module without can filter?


4-5 tools are doing these now , your around 2 years late on this one
wazimx
13th May, 2019, 11:10 PM
Change the configuration of the wiring
C1h to c2h
C1l to c2l
Test and report
wazimx
13th May, 2019, 11:11 PM
Chinese can blocker works
DjRomeoR
14th May, 2019, 05:21 AM
Change the configuration of the wiring
C1h to c2h
C1l to c2l
Test and report

change pins in cluster board ore in can filter ?
wazimx
14th May, 2019, 05:34 AM
On can filter
wazimx
14th May, 2019, 05:39 AM
Either or.. wire can filter up
C1h on filter will be c2h on cluster board
C1l on filter will be c2l on cluster
And dont forget to bridge the point also as show on the pdf u reviece with filters
Steve182
14th May, 2019, 06:06 AM
i use Lonsdor (key programmer) to reset FEM to CERO.... works well on FEM and BDC.
And also the canfilters works well (yanhua) (works with FEM and CAS4) (tested)
DjRomeoR
14th May, 2019, 06:42 AM
Either or.. wire can filter up
C1h on filter will be c2h on cluster board
C1l on filter will be c2l on cluster
And dont forget to bridge the point also as show on the pdf u reviece with filters

Nope same nothink happens like can filter wont be in cluster dont show anythink :( all 6 bad nah...........

Maybe are tool who can FEm reset via obd dont solder ore put filters? :)