Edc17c14 Help needed!!

[ziim]

Hellou good fellas!
I need a help what to do next. I chipped my car and now the dashboard is like christmas tree, i know i ~~~~ed up very bad.
Car is audi a6c6 2009 with ed17cp40. I readed and write it via obd with kess, write finished, error occured and then i made recovery but nothing. I bdm it readed again backup and flash, and writed 2 times, one original one chipped file.but nothing, still beautiful christmas on dash. I think its eeprom crash, still writing mode. And now i need help for my ~~~~ up. How im gonna fix it, or its not possible anymore. Sorry for bad english.

[jameshal18]

Hellou good fellas!
I need a help what to do next. I chipped my car and now the dashboard is like christmas tree, i know i ~~~~ed up very bad.
Car is audi a6c6 2009 with ed17cp40. I readed and write it via obd with kess, write finished, error occured and then i made recovery but nothing. I bdm it readed again backup and flash, and writed 2 times, one original one chipped file.but nothing, still beautiful christmas on dash. I think its eeprom crash, still writing mode. And now i need help for my ~~~~ up. How im gonna fix it, or its not possible anymore. Sorry for bad english.

Hello friend. edc17 has risk to write by obd. Did you try to write by ktag in bench the first file you read by obd?

[ziim]

I dont have ktag, i writed sucessfully ori file with kess triocore.

[jameshal18]

does engine start? only have lights on dash?

[ziim]

I didnt have balls to try, if i switch ignition on. Then esp fault brake faults and cooling fans go 100precent work. I think its stuck on recovery ore something. If i did recovery same things was happening but, end of the recovery error occured make the recovery again, then i closed it and removed the ecu and read/write in bdm

[jameshal18]

Maybe you can try enter in all car units with a good diagnostic tool an erase all error codes. they had lost communication with ecu that's why you have dash like Christmas tree

[ziim]

I thinked same do diagnost on a car with vcds and see what faults are and report here. Okay ill go do it and we will see whats next.

[ziim]

Morning mind fresh mind.
Obd file is not the same it was in bdm mode. I writed obd file via bdm and thats why i have smashed potatos ecu.
Gonna do all obd and bdm files together fix file for bdm writing with galletto. I update if all are back to good.

[ziim]

Guys i still need a little bit help. I need a original bdm read, if maby someone have it.
ECU: Bosch EDC17CP14
SW number: 1037516623
Part/Upgrade number: 4F9910402A 0080

[jameshal18]

Guys i still need a little bit help. I need a original bdm read, if maby someone have it.
ECU: Bosch EDC17CP14
SW number: 1037516623
Part/Upgrade number: 4F9910402A 0080

I found this file in another forum. Same software they say. I think it is bench read but dont know what tool.

619781

[ziim]

ill go check right now

[jameshal18]

Dont have my pc here to check the file. you can wait 2 hours to return to my pc.

Also found this complete backup with flash and eeprom.

619785

[vitaliyl]

You will need Odis Engineering for reflashing ecu, or correction flash & eeprom.

[ziim]

Those didnt match. I found a bdm original but i think now its gonna be immo problem. Ill try. Thanks for helping. And someone know how to step by step remove immo where what eeprom or in flash

[ziim]

Right now i fixed flash but eeprom is half emty. Ill keep updated

[ziim]

Otp dosent let write eeprom what to do?

[ziim]

Where is immo aadress in eeprom, upper somewhere or down, if up then i can make it. Someone?

[jameshal18]

maybe you can downoad and use this?

https://www.digital-kaos.co.uk/forums/showthread.php/714480-IMMOFF17-EDC17-MED17-EEPROM-IMMO-DISABLER-for-DK-user?highlight=edc17+immo

[ziim]

I made a half half eeprom a d all good. Car starts and runs perfectly no faults no need immosolutions. Many thanks who helped.