PDA

View Full Version : UP TO 1500 RPM IDLE OF 206 HDI EDC16C34 0281012528 .BIN ATTACHED



MadridEcu
14th May, 2019, 06:54 PM
Hi to all of you,

Currently i m using a 206 engine 1.4 hdi engine to move a 220v generator in a racing truck.

My porblem is how to stablish the engine to 1500rpm with variations of engine load and i cannot find a definitive solution.

I perform repros by basically and i wish up to 1500rpm my idle reprograming the archive. Anybody colud / Know make this kind of repro ???

Attach the .ori REAF WITH GALLETO CLO

If any body has any other idea how to stablish the idle to 1500rpm with full load and it's variations. The last solution i am thinking is an arduino +servomotor connected by a shaft to the OEM throttle pedal.

THANKS IN ADVANCE TO ALL OF YOU

mancioks
14th May, 2019, 09:19 PM
try this file and report

MadridEcu
16th May, 2019, 07:17 PM
Thank you very much Mancioks!

Your file works fine , at least at cold start an 5 min later . I need to test with working temperature and with load variations.
I think that works fine as well.

mancioks
16th May, 2019, 07:28 PM
Your'e welcome ;)

mancioks
16th August, 2019, 04:30 PM
New file for you :)

MadridEcu
6th November, 2019, 06:50 PM
Hi again Mancioks,

The file works fine like i requested in las mp ( 1800rpm and maximum torque) . You are a good chiptunner and a great person to be so patient with me... Now the generator works fine but Frequency is not properly.

I whis request the last tunning, I need go back the iddle to 1500rpm but with the maximun torque in this point.

If you could tunning file again i will be very pleasured with you.

With my best regards!!

mancioks
6th November, 2019, 09:32 PM
new file for You :)

MadridEcu
26th February, 2020, 07:36 PM
Hello again,

My problems arent solved yet. Now the ecu limit the engine after 8 minutes aproximately to 900rpm. I whish erase ALL DTC codes if possible in the last file.


Could anybody help me again???

Best regards

Meat-Head
26th February, 2020, 07:44 PM
Did you not read my post in your other thread ?

MadridEcu
2nd March, 2020, 08:35 PM
Hello,

Sorry but really i didn't read it, we are 4 persons which are attending this and other posts and some times its very difficult managed it properly.

Could you provide the link where i can read your answer??

Sorry for the inconveniences.

Best regards

Meat-Head
2nd March, 2020, 09:10 PM
https://www.digital-kaos.co.uk/forums/showthread.php/806421-ERASE-ALL-DTC-TABLE-FROM-206-HDI-EDC16C34-0281012528?p=3798992&viewfull=1#post3798992