Jaguar Delphi MPC555

[Xno]

Hello guys,

I failed programmation of ECM on my jaguar X-type 2009 2.2d dpf, immo on, via JLR SDD ( and now its dead on SCP network , brick could have done that?)

I would like to read/write flash Delphi MPC555/6 flash : S29AL004D70MFM02

Is it possible with some tool like BDM etc.. ?

something like this would work ? https://www.ecubay.com/delphi-classic-bdm-adapter-4-in-1

ALL help welcomed.

Thanks

Xno

[jameshal18]

Have a look on this kit also. maybe it has what you need.

http://www.obdexpress.co.uk/wholesale/ktag-kess-ktm-bdm-probe-adapters.html (http://www.obdexpress.co.uk/wholesale/ktag-kess-ktm-bdm-probe-adapters.html)

[Xno]

And for the reader , something like fgtech galleto 4 ?

[jameshal18]

And for the reader , something like fgtech galleto 4 ?

I use Ktag for bench reading but fg tech is good also.

[Xno]

i think i gonna go to ktag 7.020

[Xno]

anyone knows the pinout for bdm connector, cause i order the 22 adapter pack, but there are many called "motorola mpc5xx 1. 2. 12.13"

621391

[rob h]

Ktag will show you these numbers in the connection manual.


The numbers 1-22 are printed on these.

Choosing the wrong adapter, will damage your ecu.

Number 12 14AM00T00M D-ph DCI ( from memory, please check first. )

1 14AM00T01M B-osch
2 14AM00T02M D-ph DCM
3 14AM00T03M B-ootloader ST10xx
4 14P600KT04 I-nfineon Tricore EDC/MED17
5 14AM00T05M M-arelli MPC55xx JTAG
6 14AM00T06M D-ph MPC55xx JTAG
7 14AM00T07M D-enso CN1 Boot
8 14AM00T08M D-enso CN2 Boot
9 14AM00T09M D-enso CN3 Boot
10 14AM00T10M D-enso CN1 AUD
11 14AM00T11M D-enso CN2 AUD
12 14AM00T00M D-ph DCI
13 14AM00TBAS Base Adapter 1.27
14 14AM00T14M NexusEFI T6 Lotus
15 14AM00TB02 Magneti M-arelli BDM insert
16 14AM00TB01 S-iemens BDM insert
17 14AM00TB03 EDC7 BDM insert
18 14AM00T18M Magneti M-arelli MPC/SPC56xx
19 14AM00T13M N-exus MPC5xx TRW ECU
20 1.6tdi - S-iemens-Continental PCR2.1
21 14AM00T15M To-yota NEC76F-20
22 14AM00T16M To-yota NEC76F-26