View Full Version : Kess V2 5.017 Bosch EDC16C35
MartinF1
18th May, 2019, 02:30 PM
Hello did anyone tried to read/write EDC16C35 with kess v2 5.017 clone?
I am just wondering because I had some problems with MPPS concidering writing this ECU.
BMW E87 120d, 163hp to be particular
Thank you
BR :D
dudus8
18th May, 2019, 04:08 PM
Yes, Read/Write OK with Kess.
huskypt
18th May, 2019, 05:30 PM
Hello did anyone tried to read/write EDC16C35 with kess v2 5.017 clone?
I am just wondering because I had some problems with MPPS concidering writing this ECU.
BMW E87 120d, 163hp to be particular
Thank you
BR :D
I Read/write by MPPS and read/write by kess always no problem ... checksum correction OK
AudiA53xxx
11th August, 2019, 08:43 PM
I Read/write by MPPS and read/write by kess always no problem ... checksum correction OK
Do you manage to write on K-Line with 225 Ohm or how, because I saw many people fail writing this ECU with Kess V2 5.017
Thanks
Gesendet von iPhone mit Tapatalk
damjantuze
12th August, 2019, 12:42 AM
No problem with kessv2 clone on that ecu mpps is shit u can brick ecu
figani
12th August, 2019, 07:17 AM
No problem with kessv2 clone on that ecu mpps is shit u can brick ecu
There are many threads/posts with users of Kess Clones and problems with writing on that kind of ecu´s...
and also with power suply...
damjantuze
12th August, 2019, 01:26 PM
Some of the clones works perfect some dont work dont know i got friend he bought kessv2 clone red and its not r/w some ecu he got problems
in my opinion kess 4.03 is best i never got problem with red 5.017 i got on some cars
Lambda1
12th August, 2019, 02:00 PM
For EDC16C31 and EDC16CP35 I would done backup via ktag first.
you also can write with ktag via bdm... works fine at both. For Kess clone I wouldnt be sure...
AVDigitale
12th August, 2019, 02:27 PM
in bmw cars always good power supply to battery 13.5-14v and never problem to this cars
edc16c31,c35 and cp35 all going good over obd and with kess or mpps
AudiA53xxx
19th August, 2019, 10:50 PM
Hello,
today I tried it out, connect a good Battery Charger my Battery was at 13.1V and first Full read with Kess and than Write with kess.
Read 34 Minutes
Write 5-7 Minutes
Usw K-Line on E92 335D and in Options you have tu usw 225 OHM write speed.
I hope this help some People.
Gesendet von iPhone mit Tapatalk
AndreiCRT
1st June, 2022, 04:46 PM
Yes, this works, stable voltage and pull up resistance set to 225OHM, done with kessv2 clone
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.