PDA

View Full Version : Audi A4 Concert 2+ Blaupunkt 8E0035186AK code



graboo92
19th May, 2019, 10:09 AM
Hi,
Could you please find the code in this 95128 dump?
Audi A4 B7
Concert 2+
8E0 035 186AK

Thank you very much.

andm266
19th May, 2019, 10:22 AM
...............1201

graboo92
21st May, 2019, 12:27 PM
It works, thank you a lot!

Heraxxx23
3rd June, 2022, 12:43 PM
Hello,
i did change instrument cluster and have problem with code.
eeprom from radio added to post.
somebody can help me?

Audi A4 B7
Concert 2+
8E0 035 186AK

Mankyro
3rd June, 2022, 12:45 PM
Hello,
i did change instrument cluster and have problem with code.
eeprom from radio added to post.
somebody can help me?

Audi A4 B7
Concert 2+
8E0 035 186AK



.........0766

Decode Ghost
3rd June, 2022, 12:46 PM
Hello,
i did change instrument cluster and have problem with code.
eeprom from radio added to post.
somebody can help me?

Audi A4 B7
Concert 2+
8E0 035 186AK



hi,
.........0766

Heraxxx23
3rd June, 2022, 12:54 PM
ThX, i'll check and send feedback.

Heraxxx23
3rd June, 2022, 01:44 PM
Radio stuck on SAFE i can't enter pin.
Any sugestion?

Mankyro
3rd June, 2022, 03:51 PM
Radio stuck on SAFE i can't enter pin.
Any sugestion?
Connect to the car

Heraxxx23
3rd June, 2022, 06:35 PM
Connect to the car
Radio is in the car.
What i have to do ? wait?
I don't have safe 1 or 2, just safe. Before read eeprom there was such a possibility.

Mankyro
3rd June, 2022, 06:38 PM
Radio is in the car.
What i have to do ? wait?
I don't have safe 1 or 2, just safe. Before read eeprom there was such a possibility.
Check the soldering

Heraxxx23
3rd June, 2022, 07:16 PM
Check the soldering
All connection looking good, no missing component. EEprom memory death after soldering?
Is there any key combination available to bring up the code entry option?

Mankyro
3rd June, 2022, 07:30 PM
All connection looking good, no missing component. EEprom memory death after soldering?
Is there any key combination available to bring up the code entry option?
Measure pin 8 +3,3v

Heraxxx23
3rd June, 2022, 08:07 PM
Measure pin 8 +3,3v
All voltages and waveforms are correct. From the general design without memory, the radio would not start.
I"m out. I'll try with another radio.
I"ll come back with another dump.
Thanks for help.

Heraxxx23
8th June, 2022, 04:00 PM
New memory chip and radio come back to live. Thx for help.