2001 VW Beetle immo off

[Hebbydee]

Hi Guys,
I keep getting Block protected come up on read Any ideas?
Reading B58085 as a 24C02 as everyone has recommended.
Thanks

[Hebbydee]

Well Block Protect:0000H--03FFH to be exact

[brend]

Why is it so complicated!...............:lollypop:
Desolder/read and if need help load !
If yours programmer not read this,check pins!

It's standart eeprom and it's without same protection.









Well Block Protect:0000H--03FFH to be exact

[Hebbydee]

Thanks

Yes do not know why so difficult for a straight forward job. Connections seem all fine and Batronix normally works well. I even tried it on an old Wellon which is where I get the Block protected bit but both read same blank.
621681

[brend]

Pin connection 100% or wrong set type in programmer!

[Hebbydee]

Any idea of what set type you would use for this going by the other forum threads need to use 24C02 I am all out of ideas checked connections, 621702

[Lambda1]

Ecunumber? i think you read wrong eeprom + bad soldering job bro :D

[Hebbydee]

621741621742
Tried reading the Fairchild chip too but same blank read. I assume has to be set type I really don't know. I just read C63 eeprom fine using same adapter.
And that is factory solder job before removed chip. I hate to see what you think of it when it goes back on :hurt:

[brend]

Working with these banal chips is easy?
If you can't handle this simple job then
there is nothing to advise here!..............:dontknow:


Throw this idea out of your head and get somewhere to wash dishes.
There is certainly simple!





621741621742
Tried reading the Fairchild chip too but same blank read. I assume has to be set type I really don't know. I just read C63 eeprom fine using same adapter.
And that is factory solder job before removed chip. I hate to see what you think of it when it goes back on :hurt:

[Hebbydee]

Ok Brend thanks for the help mate you are a real inspiration.
I can see why in the last 11 years of doing this I didn't bother posting anything. Such a positive crowd.

[Hebbydee]

On a positive note I managed to finally get a read out of the bloody thing.

Here is the dump if anyone is still happy to help me for IMMO off.



Thanks

[Lambda1]

here you go.
magic buttons

[Hebbydee]

Thanks Lambda1 I will download it once I am able.
Any ideas as to why I keep getting sent to the login page when I go to download your file saying I am not logged in?
I manage to download any other file in other threads.

[brend]

Ok Brend thanks for the help mate you are a real inspiration.
I can see why in the last 11 years of doing this I didn't bother posting anything. Such a positive crowd.

You instead of hysterics to roll up and arise, it would be better to listen to what experts tell you here.
And here mostly work with dumps, this means that to communicate you must know how to use the programmer.
Here nobody will teach you this ,especially with such banality!

Your whining won't get you anywhere!

[Lambda1]

Thanks Lambda1 I will download it once I am able.
Any ideas as to why I keep getting sent to the login page when I go to download your file saying I am not logged in?
I manage to download any other file in other threads.
Not enough helpfull posts, not enough recommendations...
Download here:.xup.in/dl,18697336/beetle_read_fairchild_24C02.bin/
PW:digitalkaos

[Hebbydee]

Thanks mate appreciate it

[Hebbydee]

Thanks again. No need to comment on these threads that are banal to you.
I can see from your status you are obviously a wealth of knowledge. Yes don't do much on an old chip reader, mainly OBD and bench so I am sorry I am not of a satisfactory standard in this domain (not my domain).
I posted to get some help because of this reason, not whining just pissed off with nothing working and then getting smart arse comments anyway I appreciate your help. Thanks again.

[brend]

It's good that you understand!
Criticism helps people to become stronger and smarter in our business!............;)




Thanks again. No need to comment on these threads that are banal to you.
I can see from your status you are obviously a wealth of knowledge. Yes don't do much on an old chip reader, mainly OBD and bench so I am sorry I am not of a satisfactory standard in this domain (not my domain).
I posted to get some help because of this reason, not whining just pissed off with nothing working and then getting smart arse comments anyway I appreciate your help. Thanks again.