Mehanik
23rd May, 2019, 08:53 PM
Considered with the help of Galetto v54 0475 (via OBD2) the block ECM3.7AP ssangyong korando 2.0.
After trying to fill the firmware, the error stopped at 2%.
The car will not start. Filled the stock firmware with the help of K-Tag, the car also does not start.
I ask for help.
Now I am reading the firmware through Galetto j-tag.
Maybe someone has a stock firmware ECM 3.7 ssangyong korando 2.0 e-xdi.
Thanks to everyone who responds.
After trying to fill the firmware, the error stopped at 2%.
The car will not start. Filled the stock firmware with the help of K-Tag, the car also does not start.
I ask for help.
Now I am reading the firmware through Galetto j-tag.
Maybe someone has a stock firmware ECM 3.7 ssangyong korando 2.0 e-xdi.
Thanks to everyone who responds.