golf gti mkv with cdla engine

[adib5314]

Hello guys i have a golf mk5 gti from the year 2007 with engine code BWA but i replaced the engine for an CDLA out of an audi s3 2011
the engine is complete with k04 charget etc. but i must map it and i wanna run first with the original mapping from an audi s3 does somebody have the file for me or could help me with that.

i live in the netherlands nearby the german border

greets and regards Adib

[FlashTune]

i have for shure a Map for 2.0TFSI and i can make it also :)
let me know

[Peppos3]

Hello guys i have a golf mk5 gti from the year 2007 with engine code BWA but i replaced the engine for an CDLA out of an audi s3 2011
the engine is complete with k04 charget etc. but i must map it and i wanna run first with the original mapping from an audi s3 does somebody have the file for me or could help me with that.

i live in the netherlands nearby the german border

greets and regards Adib

​the first thing you need to do if you want to keep your sw is to mount the fuel pressure sensor and the map sensor otherwise, back up the control unit and post it

[icezero2010]

​the first thing you need to do if you want to keep your sw is to mount the fuel pressure sensor and the map sensor otherwise, back up the control unit and post it

he need only 3 bar mapsensor and immo off :-)


to use the s3 file

[Peppos3]

06j906051d fuel sensor
038906051c map sensor
swap ecu sw s3

[icezero2010]

06j906051d fuel sensor
038906051c map sensor
swap ecu sw s3





what is the differce between his fuel sensor and the s3 sensor ???
both has the same calibration and the also the same sensor

he need only 3bar mapsensor

[Peppos3]

it happened to me (swap axx engine with cdl engine) that not changing the sensor I felt like a whistle and the car did not go well,
anyway the vag group from axx / bwa to bhz / cdl changes the sensor code.

[adib5314]

Thanks guys for your replys what is the best thing to do immo off is no problem i have a bearlock installed :devil:

[Peppos3]

Thanks guys for your replys what is the best thing to do immo off is no problem i have a bearlock installed :devil:

swap sw ecu s3 immo off

[icezero2010]

swap sw ecu s3 immo off

than u need change mapsensor !

[Peppos3]

than u need change mapsensor !

this has already been said previously

[Bitlas]

Hi did some one have Stage 1 for CDLA engine?

[Lambda1]

No file, no help

[Bitlas]

Will do tommorow sorry.

[calibracbr]

You can flash edition 30 file

[Bitlas]

Sorry I don't understand what you mean.Edition 30 file?