PDA

View Full Version : DASHBOARD FORD RANGER 2019 MCU R7F701405 HOW TO READ


sirduyduc
28th May, 2019, 01:45 PM
Hello every body!
I have a dashboard of ford Ranger 2019, with part number: JB3T-10849-PH, used MCU R7F701405 (as below picture attachment).
Please hepl me, how to read data form R7F701405.
I used UUPS, Iprog-clone but not crip read R7F7XXXXX. And i try used CG100 with BDM+4, in area Progamer, i see R7F701405 and Diagram pin connect with BDM+4. But, then i connect pin R7F701405 as this diagram, and read, Cg100 notification "not support feature".
Any body can hepl me, how to read data form R7F701405. I need change odo with data of it. Tks so much all!
sagie
28th May, 2019, 03:30 PM
enigmatool obd
morrisgauge
28th May, 2019, 05:22 PM
Pretty sure it's OBD only buddy.
hivrich
28th May, 2019, 09:20 PM
Hello every body!
I have a dashboard of ford Ranger 2019, with part number: JB3T-10849-PH, used MCU R7F701405 (as below picture attachment).
Please hepl me, how to read data form R7F701405.
I used UUPS, Iprog-clone but not crip read R7F7XXXXX. And i try used CG100 with BDM+4, in area Progamer, i see R7F701405 and Diagram pin connect with BDM+4. But, then i connect pin R7F701405 as this diagram, and read, Cg100 notification "not support feature".
Any body can hepl me, how to read data form R7F701405. I need change odo with data of it. Tks so much all!

VVDI Prog claimed this processor
wiseman
25th September, 2019, 09:53 AM
Did anyone have success with this dash?
wiseman
25th September, 2019, 09:54 AM
https://uploads.tapatalk-cdn.com/20190925/af22710033e20a5b60d02be9a14108d4.jpg
rtbdiagnostic
18th February, 2020, 02:49 PM
would this cluster be the same R7F701405 or different version Renesas
rtbdiagnostic
8th June, 2020, 11:02 AM
Hello every body!
I have a dashboard of ford Ranger 2019, with part number: JB3T-10849-PH, used MCU R7F701405 (as below picture attachment).
Please hepl me, how to read data form R7F701405.
I used UUPS, Iprog-clone but not crip read R7F7XXXXX. And i try used CG100 with BDM+4, in area Progamer, i see R7F701405 and Diagram pin connect with BDM+4. But, then i connect pin R7F701405 as this diagram, and read, Cg100 notification "not support feature".
Any body can hepl me, how to read data form R7F701405. I need change odo with data of it. Tks so much all!

did you mage to sort out these new 2020 ford ranger cluster with R7F701405 any solution available yet ?
boxa76
22nd September, 2020, 11:57 PM
R7F70140(3)on transit
did It through obd2

Is there any difference in (3) (5) last number ?
rtbdiagnostic
23rd September, 2020, 05:57 AM
What tool you used to do via OBD
boxa76
23rd September, 2020, 09:59 AM
What tool you used to do via OBD
obdstar....
fmcapio
2nd July, 2021, 03:08 PM
odomaster worked for this?
hcip
2nd July, 2021, 04:21 PM
odomaster worked for this?


Somebody attempt here in may Area an Hour ago, the result can see in attached Picture (ERROR displayed, instead of mileage)

I fixed it already...
rtbdiagnostic
3rd July, 2021, 10:50 AM
Somebody attempt here in may Area an Hour ago, the result can see in attached Picture (ERROR displayed, instead of mileage)

I fixed it already...
With VVDI Prog perhaps :hello:
Chevnuts
26th November, 2022, 09:32 AM
HCIP I have the same exact dash with the same error problem after attempting by smok uhds, would you be kind enought to share the method for clearing the error message and getting the mileage showing , it's a r7f701405 just the same as you pictured and the board and processor have no eeprom near them as the posters picture shows... please help if you can guys I'm in a bit of a bind and smok are just shrugging their shoulders at the issue their programmer has created for me. Regards
hass42
10th January, 2023, 02:39 AM
Somebody attempt here in may Area an Hour ago, the result can see in attached Picture (ERROR displayed, instead of mileage)

I fixed it already...

Hello... If I read this with VVDI prog, will I be able to correct?
I have this vehicle this weekend.
Any advise is much appreciated, thank you.

Hass42
hcip
10th January, 2023, 02:55 PM
Hello... If I read this with VVDI prog, will I be able to correct?
I have this vehicle this weekend.
Any advise is much appreciated, thank you.

Hass42

don't try it or you'll regret it!
hass42
10th January, 2023, 06:38 PM
don't try it or you'll regret it!

Any suggestion how I can do this?
Landetos
15th April, 2024, 12:39 PM
Somebody attempt here in may Area an Hour ago, the result can see in attached Picture (ERROR displayed, instead of mileage)

I fixed it already...

Hi,

Which tool you used for ERROR problem repair?

Thanks in advance!

Cheers!
RGautotronic
21st July, 2024, 12:47 AM
buenas tardes compaņeros tengo una ranger raptor 2021 e intentado mover el kilometrage con xtool d4 por obd2 ,lee el kilometrage actual pero al nodificar y modificar el kilometrage me sale error alguno a podido solucionar este problema e podido leer tambien en banco con cg100x pero no tengo para modificarlo le adjunto imagen 1037298103729910373001037301
marina_rv
21st July, 2024, 03:27 PM
buenas tardes compaņeros tengo una ranger raptor 2021 e intentado mover el kilometrage con xtool d4 por obd2 ,lee el kilometrage actual pero al nodificar y modificar el kilometrage me sale error alguno a podido solucionar este problema e podido leer tambien en banco con cg100x pero no tengo para modificarlo le adjunto imagen

STOP flud in all topic