PDA

View Full Version : Mercedes ML164 without EIS (missing)



HeXeN
1st June, 2019, 09:05 AM
Hi, car Mercedes ML164 without EIS (missing). After buy used EIS, what modules need to be reset?

Is possible to unlock automatic transmission to N position to move the car?

tech111
1st June, 2019, 09:49 AM
Engine ecu and transmission , car will run and after you do all the codings .

Manta1600
1st June, 2019, 10:24 AM
usually on most cars must open the gear shft cover and release the lock

PS
Sorry I just check this is possible on W163 on W164 isnt possible

HeXeN
1st June, 2019, 11:08 AM
Engine ecu and transmission , car will run and after you do all the codings .
VVDI MB will be enough?
Or do I need MB STAR Diagnosis? (which I dont have)

HeXeN
1st June, 2019, 11:09 AM
usually on most cars must open the gear shft cover and release the lock

PS
Sorry I just check this is possible on W163 on W164 isnt possible
Also cant find any info. So they tow it with small rollers under wheels?

mercis
1st June, 2019, 05:05 PM
6 screw from kardanwelle and you can car move

pepi
1st June, 2019, 06:34 PM
At W164 you must sync ECU,ISM, TCU ,dashboard (you will have ------) and write original VIN on EZS because you will have trouble with airbag unit.

HeXeN
2nd June, 2019, 09:39 AM
At W164 you must sync ECU,ISM, TCU ,dashboard (you will have ------) and write original VIN on EZS because you will have trouble with airbag unit.

Without MB star not possible?

Gavra
2nd June, 2019, 08:58 PM
NO, you need tool for W164 to tow, goes on one wheel so it can be freewheeled. For coding it will be impossible without star and Xentry flash access.......al least without warnings on the dash ...