Kawasaki Z800 21175-0789 RA86 need help

[joshtyv]

HI,
kawasaki Z800
ecu 21175-0789
eeprom RA86
read as 93C86

i have 2 bike all key lost, both ecu also can make key with tango / vvdi2 / tm 100 with 4d60 / cn5,
but immo blinking, cant start.
code 36,

can some one help ?
data corrupt ? or have secret trick ?

before this i have done 1 z800, also try few time den can start the bike,
but this 2 bike already 1 week and many 4d chip i try also fail,

or isit have another eeprom to read ?

[bob1620]

36 Ignition Key The ignition key must use register key.
If the blank key or broken key is used, the vehicle is no start and run.
don't put 2 keys near ring

[datagaraj]

Hello
please send keys data

[joshtyv]

thanks for help Mr Datagaraj,
here is the bike 2 data,
key info
P1 FF
P2 05
P3 24 7B FC 87
P4 4B 48 49 43 50

and data read out 93c86
write with Tango KEY 2 possition

625126625127

[datagaraj]

Hello
please try this

[joshtyv]

Hello
please try this

Thanks bro
will try and report
and thanks again for help

[joshtyv]

Hello
please try this


halo, Mr Datagaraj,
cant start also,
40bit or 80 bit also same
blinking immo code 36,
have any idea?

[lyingyot]

Hi Bro , have the issue fixed ?

[igorr]

check soldering or capacitors near eeprom tango work ok I made couple this bikes with tango

[lyingyot]

check soldering or capacitors near eeprom tango work ok I made couple this bikes with tango
Bro , do we need to generate Kawasaki 4D chip to make it work with tango ? and only 1 key add in tango is enough to make it done?

[igorr]

make key on position 1 4d60 80bit
no nead precoding

[Geekey]

Hi all, I'm facing the same situation, tried to make key with Tango and also tmpro2, bin file is detected correctly but bike don't start, blinking immo light. I've checked all connections on eeprom and surrounding caps and resistors but no success. What may be the issue?