Ducati Multistrada 1000 Ds inmo off

[bob1620]

Hello

I have a problem with a ducati Multistrada 1000DS with loss of keys, could you remove the inmo from the cdi?
Please.
Greetings

[bob1620]

here is file

[eepromdom]

Magnetti marelli 5AM hybrid I can immo off.... Send the dump on st10f269 for editing...

[bob1620]

sorry wrong file

[bob1620]

eepromdom What program you use to read this ecu
file is correct or not
Thanks

[DCT748]

yes correct file
here your file
check PM !
DCT748

[eepromdom]

eepromdom What program you use to read this ecu
file is correct or not
ThanksI use the ktag to read it.. Or xprog m if you wanna dig out the gum to get at the micro...

[bob1620]

Hello not pass bike cannot start

Thanks

[DCT748]

I was wrong the file had to have a password normally

it was not for this to be displayed, I know what I changed

if not start = you have another problem on the bike
(and no longer a problem of immo)

[DCT748]

behind the start relay, there is normally a small control connection, to see if it can not be disconnected maybe?

[bob1620]

Hello
bike can star but idle not smooth
Thanks

[DCT748]

you have to reset TPS value I think

[bob1620]

yes reset tps it's run only 3% look less little run 939 rpm look to low
adjust cable is ok
Thanks

[DCT748]

if you have the software to do the reset TPS, then once the engine is hot enough, you have to adjust the injection by increasing the idle mixture = trimmer adjustement

[bob1620]

software What is software name?
Thanks

[DCT748]

unofficial but which operates well : JPDIAG

[bob1620]

i have test this program but always halt after used 10 min and hard to connect ECU my com windows 10
to 2 days not pass on other program is all ok same cable same obd