Need help with TQ limiter Skoda 2.0 17c64

[sniegavirs]

Hello.
I have my first EDC17C64 on hands.
It is Skoda Octavia 2014 2.0 TDI CR with 110kW Trying to make 420Nm but no luck.
It is DSG.
In stock it should be 320Nm but in VCDS all TQ limits showed 370 as i also found in TQ maps. But i am trying to get to 420Nm but no luck finding the limiter because after mod it stays around 390Nm.


Please help.
ORI and MOD added

[golf110tdi]

You dsg is the dq250 and the gearbox is limited to 350nm. Every time the gearbox sees over 350 nm, it tells to the ECU to reduce the fuel.

[sniegavirs]

Yes it is DQ250 but are you sure about that!? Yesterday i got Damos for EDC17C64 and found 2 gearbox limiters in ECU and 1 of them was capped at 350Nm. I changed the limiters and now engine outputs almost 420 Nm to gearbox. Car goes like crazy! :)

[sdtsedat]

There us SVTQL 350 or 380nm.
I does vw scirocco 2.0tdi 150 and i had 422nm on dyno.

Verstuurd vanaf mijn SM-G960F met Tapatalk

[SpecZ]

Hello,

That is a very very basic file.

I tuned what you need for torque stuff and added a few minor things that will improve efficiency.

You can raise much more the values and tune a lot more maps.

Pass PM.

Br.

Michael

[fireblal775]

hello, i need to necessarily modify a DSQ gear does anyone do this? I do not know what I think Kess should download the original map but I do not know what to edit, etc. can you please help me? i have Octavii 3 2.0tdi 135kw (204kw adjustment) I need to edit it dsg :(