PDA

View Full Version : VAG EDC16 Tool???



z786
21st December, 2009, 11:36 PM
Hi ppl, was just askin if any1 here knows a tool that does VAG edc16 mileage adjustment????

Thanx in Advance

cammy25
21st December, 2009, 11:41 PM
VAGDASHCAN
i have tested ori and clone, both work

totalfree
22nd December, 2009, 12:58 AM
Try this program to read / write eeprom of the ECU EDC16.
In another program, change the mileage and write to ECU
This program works with the interface KL-line or KKL-line.
:wink:
(http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=8392&stc=1&d=1261439708)

m_yura
22nd December, 2009, 06:04 PM
Magic Dash CAN

aminebot
22nd December, 2009, 06:35 PM
Try this program to read / write eeprom of the ECU EDC16.
In another program, change the mileage and write to ECU
This program works with the interface KL-line or KKL-line.
:wink:
(http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=8392&stc=1&d=1261439708)

had someone tested this tool on EDC16 ?

nerko
22nd December, 2009, 08:07 PM
had someone tested this tool on EDC16 ?

EDC15 tested ok, freezes soft a bit while reading but all ok ;)
Greets friend

z786
22nd December, 2009, 10:01 PM
VAGDASHCAN
i have tested ori and clone, both work

iv seen on their website, no mention of edc16?

any1 tested the posted soft on edc16???

wat do you change the dump with?

thanx

kasim_izmir
23rd December, 2009, 06:25 PM
Try this program to read / write eeprom of the ECU EDC16.
In another program, change the mileage and write to ECU
This program works with the interface KL-line or KKL-line.
:wink:
(http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=8392&stc=1&d=1261439708)
Helle friend , thanks .... Have you more details about this software ? will i enter any value in to (Data Format Identifier) ? 10 or 11 and similar also seed&key can calculate ? and etc.
I try to connect to edc15 , can't success , i can't get any data
Regards
kasim

aminebot
26th December, 2009, 09:13 PM
I tested on a LEON 2009 2.0 TDI but it does not work ;
any idea ?

glk96000
1st January, 2010, 05:03 PM
I test on Audi A3 1.9 TDI 2006 with KKL cable (VAG 409) doesn't work!!

Jose19
1st January, 2010, 05:21 PM
I test on Audi A3 1.9 TDI 2006 with KKL cable (VAG 409) doesn't work!!
2006 !!?? You wished ............
This car have CAN system.

aminebot
1st January, 2010, 08:18 PM
2006 !!?? You wished ............
This car have CAN system.

The car have both bus K and CAN .
engine ecu is connected to k line in all cars.

mlulic
1st January, 2010, 10:18 PM
Vag k can comander read EDC 16
EDC 16 CAN system

aminebot
1st January, 2010, 11:19 PM
Vag k can comander read EDC 16
EDC 16 CAN system

it cost more that 7000 euro

Maxomat
3rd January, 2010, 03:04 PM
Try this here to correct eeprom:


http://rapidshare.com/files/329712922/EDC16eepromCalc.exe

To read the eeprom there are several tools. In worst case, you can use BDM.

Maxomat
3rd January, 2010, 06:50 PM
And here same for EDC15:


http://rapidshare.com/files/329712898/EDC15calc.exe

Works great. Tested it already.

gezame
3rd January, 2010, 09:58 PM
And here same for EDC15:


http://rapidshare.com/files/329712898/EDC15calc.exe

Works great. Tested it already.
And here same for EDC15:


Code: Check this link (http://mirrorchecker.com/linkchecker2.php?url=http://rapidshare.com/files/329712898/EDC15calc.exe)
http://rapidshare.com/files/329712898/EDC15calc.exe
Works great. Tested it already.




Hi
these two software, ethan distributed free by its author:
www.Abritus72.com (http://www.abritus72.com/download.html)

Regards.

Maxomat
6th January, 2010, 09:34 AM
Hi
these two software, ethan distributed free by its author:
www.Abritus72.com (http://www.abritus72.com/download.html)

Regards.


It's not the same soft... The two I posted here are from VAGDashcom and can more than the soft of Abritus...
Change milage in eeprom. Deactivate im*o AND set vmax at EDC16. Very interesting for guys with VW T5 or VW Crafter,...

;-)

aminebot
6th January, 2010, 01:59 PM
It's not the same soft... The two I posted here are from VAGDashcom and can more than the soft of Abritus...
Change milage in eeprom. Deactivate im*o AND set vmax at EDC16. Very interesting for guys with VW T5 or VW Crafter,...

;-)

it does not change mileage on EDC16 eeprom

MichalTCZ
4th April, 2010, 01:05 PM
Hallo,
VAG EEprom Programmer 1.18 generate error "Wrong BoudRate" when I try to connect ? What is wrong?

MOBILTRONIC
4th April, 2010, 03:37 PM
Maybe this ECU is not supported for this sw vag 1.18.If yes,try with KK interface based on mc33199.

z786
11th June, 2010, 02:52 PM
Hi, jus bumping an old thread
I NEED TO DO AN EDC16 this week
plz i need user opinions on what they use 2 do the edc16
particularly interested in these two, the strange thing is the older version is for more money??

vagdashcan clone 4.22

and

vagdashcan clone 5.05

plz need ur opinions

thanx

kiripe
11th June, 2010, 04:33 PM
I would rather go for the original VagDashCan, or even Magic Dash Can (which I have heard work ok with edc16).

I have tried the original vag dash can and know it works, but my preference for the edc16 ecu's are abrites' commander :)


No experience with the two clones you posted, sorry.

z786
11th June, 2010, 10:30 PM
no money 2 buy original ones mate, tight budget
any here thats has any of the two???

cosmind
11th June, 2010, 11:32 PM
next week I will receive the vagdashcan clone 4.22 back from china waranty :D . I'll post the result

z786
11th June, 2010, 11:39 PM
china warranty
did it not work the first time

cosmind
12th June, 2010, 12:04 PM
first time I cannot connect to car (tested on skoda II and golf V) - same problem as all other members.

I will test this and if I cannot connect to car like the last one, I will update the tool to v5.5 version - some members have said that after update they can connect to edc16 and change odometer but cannot connect to edc15 and all other functions. I need it only for edc16, for edc15 I use vag k+can 1.4

z786
12th June, 2010, 02:25 PM
how do they update it?

cosmind
13th June, 2010, 01:33 AM
install new version of vagdash , connect interface and run software

Flash_chip
13th June, 2010, 02:29 PM
install new version of vagdash , connect interface and run software

Keep us posted on receipt of your new interface.

rsibiza
13th June, 2010, 02:37 PM
had someone tested this tool on EDC16 ?


I tested on a LEON 2009 2.0 TDI but it does not work ;
any idea ?


I tryed on Audi A3 2006 2.0 TDI EDC16,can detect ecu,start reading and freezes ....

After 50 minutes,i stopped,tryed again,and same result...

So i dont think it will work on edc16...

Flash_chip
13th June, 2010, 02:58 PM
I tryed on Audi A3 2006 2.0 TDI EDC16,can detect ecu,start reading and freezes ....

After 50 minutes,i stopped,tryed again,and same result...

So i dont think it will work on edc16...
what do you like interface? box blue or black interface?
what version software?

if you can not do with "VAG DASH CAN" with what can be done to clone EDC16? I'm afraid we have no choice and must go to the original!

I looked at Abritus72, there is 1266? for:
-Interface Avdi 720?
-AN002 - Odometer by CAN 246?
-AN012-A-- EDC16x - Odometer by OBDII 300?

it is expensive.

rsibiza
13th June, 2010, 03:07 PM
what do you like interface? box blue or black interface?
what version software?

if you can not do with "VAG DASH CAN" with what can be done to clone EDC16? I'm afraid we have no choice and must go to the original!

I looked at Abritus72, there is 1266? for:
-Interface Avdi 720?
-AN002 - Odometer by CAN 246?
-AN012-A-- EDC16x - Odometer by OBDII 300?

it is expensive.

I(f you read some posts about the original tools,you would also see,that original tools have problems doing the edc16 odo.....maybee best choice would be BDM100...

Flash_chip
13th June, 2010, 03:35 PM
If you read some posts about the original tools,you would also see,that original tools have problems doing the edc16 odo.....maybe best choice would be BDM100...
Why not, I want to buy a BDM100, but the problem is that often the BDM100 clone are mounted upside down with a risk of burn out the ECU!

plus the ECU must be removed! there are customers who prefer to spend as OBD, but why not if it has no choice.

BDM100 can do with the ECU and not the dashboard, right?

Thank you

rsibiza
13th June, 2010, 03:39 PM
Why not, I want to buy a BDM100, but the problem is that often the BDM100 clone are mounted upside down with a risk of burn out the ECU!

plus the ECU must be removed! there are customers who prefer to spend as OBD, but why not if it has no choice.

BDM100 can do with the ECU and not the dashboard, right?

Thank you


Yes,BDM100 can just do EDC16/16+ ecu's and MED9xx ecu's

I use original EVC BDM,so nothing is mounted upside down...but be aware from cloned BDM...improper mounting is not the only problem.

The model with power supply,may in some cases provide more than the needet voltage to ECU,and ecu will also be death after this for reading or writing to it,but still working in car

Flash_chip
13th June, 2010, 04:23 PM
Yes,BDM100 can just do EDC16/16+ ecu's and MED9xx ecu's

I use original EVC BDM,so nothing is mounted upside down...but be aware from cloned BDM...improper mounting is not the only problem.

The model with power supply,may in some cases provide more than the needet voltage to ECU,and ecu will also be death after this for reading or writing to it,but still working in car
then after you, I must find a BDM100 powered by USB, it will be less risky?

if you know the connection to ECU for change KM?

BDM in the original CTS, cost?

According to the panel to go through R250?
did you connect?

rsibiza
13th June, 2010, 04:42 PM
then after you, I must find a BDM100 powered by USB, it will be less risky?

if you know the connection to ECU for change KM?

BDM in the original CTS, cost?

According to the panel to go through R250?
did you connect?


BDM is for reading flash eprom mcu of ecu's...R200/R250 is for reading dash,i dont have it...

dyc
13th June, 2010, 05:38 PM
buy magic dash can is worth his money ,Im using since 1 year and is the best ,very offten made dash or edc 15,16 which vag dash can not , and is possible to make more dashes from older cars too.

z786
13th June, 2010, 06:16 PM
I tryed on Audi A3 2006 2.0 TDI EDC16,can detect ecu,start reading and freezes ....

After 50 minutes,i stopped,tryed again,and same result...

So i dont think it will work on edc16...

are you talkin about the vagdashcan or the software some1 uploaded on this thread?

rsibiza
13th June, 2010, 06:20 PM
are you talkin about the vagdashcan or the software some1 uploaded on this thread?


The uploadet soft here from post nr?,but the on from here,used with KKL interface...identifies ecu correct,but freezes after while reading....it may also possible it take 2 hours?,but i wont believe this...not for so little eprom:giveup:

Best regards.

Flash_chip
14th June, 2010, 12:34 PM
BDM is for reading flash eprom mcu of ecu's...R200/R250 is for reading dash,i dont have it...
you do the ECU with your BDM100 and how you do to the dashboard?

did you connect the BDM on ECU?

Flash_chip
14th June, 2010, 12:37 PM
buy magic dash can is worth his money ,Im using since 1 year and is the best ,very offten made dash or edc 15,16 which vag dash can not , and is possible to make more dashes from older cars too.
you've tested on any car with EDC16?
you bought what site?

tehnosoftex
14th June, 2010, 01:57 PM
Bdm 100 from evc is for no use if you didn't have also original winols, I have also vagdashcan clone vers 5.05 and it works on almost all edc16 which I test. For passat or touran 2.0 ppd did not work because the ecu is siemens, but also vcds cannot retreive it. Today I try to read a audi a6 2.7 tdi edc16 from 2008 but vagdashcan give me a scifi value. I do not proceed whit the writing, but I save the dump. I analyse later and I see the original mileage. Also vcds cannot read the mileage from that ecu.

Flash_chip
14th June, 2010, 10:51 PM
Bdm 100 from evc is for no use if you didn't have also original winols, I have also vagdashcan clone vers 5.05 and it works on almost all edc16 which I test. For passat or touran 2.0 ppd did not work because the ecu is siemens, but also vcds cannot retreive it. Today I try to read a audi a6 2.7 tdi edc16 from 2008 but vagdashcan give me a scifi value. I do not proceed whit the writing, but I save the dump. I analyse later and I see the original mileage. Also vcds cannot read the mileage from that ecu.
Your VAGDASHCAN made the EDC16 Audi? example of vehicles tested and their year?

you can change the KM (in ECU & Dash)?

what site you bought your VAGDASHCAN? "PM" if you do not want to advertise.

what is it value "Scifi?

Normally, if you have a recent version of VCDS (I think from 908.0), you have the button EDC15/EDC16 mileage.

Thank you for your sharing information.

dyc
15th June, 2010, 06:05 AM
I have tested on many edc16 magic dash of course original (there is no cloned interface) and vag dash can 5.05 cloned

Flash_chip
15th June, 2010, 08:58 PM
I have tested on many edc16 magic dash of course original (there is no cloned interface) and vag dash can 5.05 cloned
You come to do (DASH and ECU) for EDC16?
how much you've paid? and which site?

Thanks

glk96000
15th June, 2010, 09:25 PM
SMOK (http://www.magicdash.com/)

SMOK (http://www.magicdash.com/index.php?lang=en&id=oferta&kategoria=1&produkt=6)

more fonction is optionnal!!!

I see a new option of carprog

VAG EDC15/EDC16 by OBD - odometer correction, PIN code read (http://www.codecard.lt/carprog/software/ecu/vag-edc15/edc16-by-obd-odometer-correction-pin-code-read/prod_434.html)

Flash_chip
15th June, 2010, 09:57 PM
SMOK (http://www.magicdash.com/)

SMOK (http://www.magicdash.com/index.php?lang=en&id=oferta&kategoria=1&produkt=6)

more fonction is optionnal!!!

I see a new option of carprog

VAG EDC15/EDC16 by OBD - odometer correction, PIN code read (http://www.codecard.lt/carprog/software/ecu/vag-edc15/edc16-by-obd-odometer-correction-pin-code-read/prod_434.html)
If I buy one MAGICDASHCAN without paying duties, I can do KM DASH and ECU EDC16?
SMOK is the only provider of this interface?

milanoffracing
16th June, 2010, 01:08 AM
SMOK (http://www.magicdash.com/)

SMOK (http://www.magicdash.com/index.php?lang=en&id=oferta&kategoria=1&produkt=6)

more fonction is optionnal!!!

I see a new option of carprog

VAG EDC15/EDC16 by OBD - odometer correction, PIN code read (http://www.codecard.lt/carprog/software/ecu/vag-edc15/edc16-by-obd-odometer-correction-pin-code-read/prod_434.html)

Don't use carprog, most of their products have a lot of problems and program working only with 50% of cars in list. :beheaded:

glk96000
16th June, 2010, 06:46 AM
If I buy one MAGICDASHCAN without paying duties, I can do KM DASH and ECU EDC16?
SMOK is the only provider of this interface?


1) yes i think
2) try this link for an other supplier

Tech-Car Elektronika Samochodowa :: Magic Dash CAN EDC16 (http://sklep.tech-car.nazwa.pl/index.php?p62,magicdashcan-edc16)

glk96000
16th June, 2010, 06:47 AM
Don't use carprog, most of their products have a lot of problems and program working only with 50% of cars in list. I have original one from them, about updates just forget, for all new cars in your new version you need to pay:beheaded:

with mine i haven't any problem

milanoffracing
16th June, 2010, 11:03 AM
with mine i haven't any problem

Yes if you can't use it ,no problems :ahhhhh:

glk96000
16th June, 2010, 06:45 PM
if you say

z786
16th June, 2010, 10:45 PM
what problems does the carprog have?

milanoffracing
16th June, 2010, 11:31 PM
what problems does the carprog have?

I have VAG CAN Programmer from them.When I received my brand new interface from them inside I see manual with atention: You need to make some hardware modifications for good work. :ahhhhh:Not working with all cars from list, in codecard site you can see list of supported cars:
Seat Leon (2005+)
Seat Toledo (2005+)
Seat Altea
Seat Altea XL
VW Jetta (MY2006)
VW Caddy
VW Golf5
VW Crossgolf
VW Touaran
VW EOS
VW Individual
VW Passat platform B6 (MY2006)
Skoda Octavia II
Skoda Scout
Skoda Roomster
Audi A3
Audi A8

Audi A6/Q7 update ready!


in program one big part from them missing:
VW Jetta (MY2006)
VW Crossgolf
VW Touaran
VW EOS
VW Individual
VW Passat platform B6 (MY2006)
Skoda Scout
Skoda Roomster
Audi Q7
:secruity:
After some updates car list is changed golf5 to 07.2006 , octavia and caddy too .I see new cars in program but they are not active,you need to pay for him. :heeeelllllooooo:

With navi soft the same situation.This is one small part from problems that this tool have.

kams20040
20th June, 2010, 11:52 AM
i try in golf tdi year 2005 dash ok but ecu not ok i don t understand someone can help me please thank you.

nauris
26th June, 2010, 11:42 PM
I have VAG CAN Programmer from them.When I received my brand new interface from them inside I see manual with atention: You need to make some hardware modifications for good work. :ahhhhh:Not working with all cars from list, in codecard site you can see list of supported cars:
Seat Leon (2005+)
Seat Toledo (2005+)
Seat Altea
Seat Altea XL
VW Jetta (MY2006)
VW Caddy
VW Golf5
VW Crossgolf
VW Touaran
VW EOS
VW Individual
VW Passat platform B6 (MY2006)
Skoda Octavia II
Skoda Scout
Skoda Roomster
Audi A3
Audi A8

Audi A6/Q7 update ready!


in program one big part from them missing:
VW Jetta (MY2006)
VW Crossgolf
VW Touaran
VW EOS
VW Individual
VW Passat platform B6 (MY2006)
Skoda Scout
Skoda Roomster
Audi Q7
:secruity:
After some updates car list is changed golf5 to 07.2006 , octavia and caddy too .I see new cars in program but they are not active,you need to pay for him. :heeeelllllooooo:


With navi soft the same situation.This is one small part from problems that this tool have.


I have no problems with my carprog

Have you know that all passat/caddy/golf5/touran.. to 2006/07 have not cripted eeprom.... but after 07/2006 all VAGs with CDC32xx have cripted part of eeprom, and you nead to buy other software, and Carprog do these cars verry good by OBD!
In all tools this update is payable like in carprog!

A630V
27th June, 2010, 08:56 AM
it cost more that 7000 euro
You can easily find well working k+can commander interfaces from China, at very low prices.
I've got the V 1.4 with soft, and it's been working right for me ;)
Dont let that... " some abusive sellers", change the real price of a simple cable with a pretty little MB!!!

That interfaces are all made in PRC (China), even when selt in Europe or America...

And, in adition of shipping costs + eventually custom fees, that sellers arrive really often to 400% benefits...

I'm not a seller :) But an intelligent Buyer ;)

Gonzalo

A630V
27th June, 2010, 09:06 AM
There are to kinds of rates for CAN BUS.
You should choose the right one:
11 bytes
29 bytes
Both 50k

All this is supposed you've intalled your interface the right way... COM PORTS BAUD RATES ;)

Gonzalo

A630V
27th June, 2010, 09:20 AM
what do you like interface? box blue or black interface?
what version software?

if you can not do with "VAG DASH CAN" with what can be done to clone EDC16? I'm afraid we have no choice and must go to the original!

I looked at Abritus72, there is 1266? for:
-Interface Avdi 720?
-AN002 - Odometer by CAN 246?
-AN012-A-- EDC16x - Odometer by OBDII 300?

it is expensive.

I find a professional tool... "Digimaster" from china on "1088$"
But it isn't necesary for EDC16 dashboards....

I find the right machine for this is TACHOPRO 2008> I'VE FOUND IT ON 248$ SO 198? ... very pro for someone who does dashboards very often :party : ...

If this is only for your own car ... X-PRO M / GM XPROG or OPEL EDC16 KM TOOL ... In this cases, you will pay the same amount as if you pay someone to do it ... but the hardware still yours.

Gonzalo:wink:

milanoffracing
27th June, 2010, 09:33 AM
I find a professional tool... "Digimaster" from china on "1088$"
But it isn't necesary for EDC16 dashboards....

I find the right machine for this is TACHOPRO 2008> I'VE FOUND IT ON 248$ SO 198? ... very pro for someone who does dashboards very often :party : ...

If this is only for your own car ... X-PRO M / GM XPROG or OPEL EDC16 KM TOOL ... In this cases, you will pay the same amount as if you pay someone to do it ... but the hardware still yours.

Gonzalo:wink:

EDC16 dashboards sounds like good.:shot:

milanoffracing
27th June, 2010, 09:46 AM
I have no problems with my carprog

Have you know that all passat/caddy/golf5/touran.. to 2006/07 have not cripted eeprom.... but after 07/2006 all VAGs with CDC32xx have cripted part of eeprom, and you nead to buy other software, and Carprog do these cars verry good by OBD!
In all tools this update is payable like in carprog!

I know this, but interesting do you see this cars in program???? :shot: I don't think so
VW Jetta (MY2006)
VW Crossgolf
VW Touaran
VW EOS
VW Individual
VW Passat platform B6 (MY2006)
Skoda Scout
Skoda Roomster
Audi Q7

Carprog is one of big fakes. If you need to lost your money this is the place.:argh:

Flash_chip
27th June, 2010, 01:45 PM
I have no problems with my carprog

Have you know that all passat/caddy/golf5/touran.. to 2006/07 have not cripted eeprom.... but after 07/2006 all VAGs with CDC32xx have cripted part of eeprom, and you nead to buy other software, and Carprog do these cars verry good by OBD!
In all tools this update is payable like in carprog!
then with what we can change the KM for a car in late 2006 (A4 RB8):questionmark:

nauris
27th June, 2010, 09:41 PM
I know this, but interesting do you see this cars in program???? :shot: I don't think so
VW Jetta (MY2006)
VW Crossgolf
VW Touaran
VW EOS
VW Individual
VW Passat platform B6 (MY2006)
Skoda Scout
Skoda Roomster
Audi Q7

Carprog is one of big fakes. If you need to lost your money this is the place.:argh:


Carprog best tool for this money!!! It is best in circuit programmer! It has a lot good OBD softs!
About VW to 2006, all(golf5, tauran, passat, caddy) it is posible to change milage with one like "golf5", becouse it is the same system and soft is the same.... looks like you do not work with odometers a lot :)
I have a lot of tools, but every day I am working with carprog, and changing odometers for 20 cars per day! I like Carprog that this tool is verry and verry stable, it is not damaging enythink!

nauris
27th June, 2010, 09:49 PM
I know this, but interesting do you see this cars in program???? :shot: I don't think so
VW Jetta (MY2006)
VW Crossgolf
VW Touaran
VW EOS
VW Individual
VW Passat platform B6 (MY2006)
Skoda Scout
Skoda Roomster
Audi Q7

Carprog is one of big fakes. If you need to lost your money this is the place.:argh:

jeta=golf/passat...
touran=golf5/passat/....

roomster, it has c86 crypted eeprom, I am doing roomster/fabia by eeprom not by OBD

Q7=A6 car prog do this car to 2009

I do not understand what is problem? Loks like, or you do not have carprog at all, or you know about VAGs odometers nothink?

nauris
27th June, 2010, 09:55 PM
then with what we can change the KM for a car in late 2006 (A4 RB8):questionmark:
carprog chnging A4 RB4 and RB8 verry good by OBD, but you must buy this update

Flash_chip
27th June, 2010, 10:41 PM
carprog chnging A4 RB4 and RB8 verry good by OBD, but you must buy this update

you do not know if the audi A4 RB8 end 2006 has a eeprom encrypted or not?

when you say you do Roomster by eeprom is that you Dessoude the eeprom?

carprog with, we can change the KM in dash and ECU?

milanoffracing
27th June, 2010, 11:45 PM
jeta=golf/passat...
touran=golf5/passat/....

roomster, it has c86 crypted eeprom, I am doing roomster/fabia by eeprom not by OBD

Q7=A6 car prog do this car to 2009

I do not understand what is problem? Loks like, or you do not have carprog at all, or you know about VAGs odometers nothink?

Thank's for your answers mate. About Carprog I have.Yes vag dashes are something new for me, until recently I had not worked with them. My apology to all members here for the wrong information provided from me for Carprog.:adore:

dbilik
28th June, 2010, 12:48 AM
I have magicdashcan. a good tool, but it not read all edc16...
Yesterday i make rb8 a4 2005, dash correct ok, but cant read edc16... But last time i make passat 2007 edc16 and no problems to read and write km in ecu...

A630V
28th June, 2010, 01:26 AM
EDC16 dashboards sounds like good.:shot:
OK men:driver:
For programming dashboards of Cars with EDC16 ENGINE ECU :marchmellow:
YOU NED TO WANT TO ... FOR UNDESTANDINDS WHAT'S WANTED TO EXPLAIN ... OTHER WAYS YOU'LL ONLY UNDERSTAND ALWAYS YOURSELF. If there's enough 4U!:birthday:

milanoffracing
28th June, 2010, 07:59 AM
OK men:driver:
For programming dashboards of Cars with EDC16 ENGINE ECU :marchmellow:
YOU NED TO WANT TO ... FOR UNDESTANDINDS WHAT'S WANTED TO EXPLAIN ... OTHER WAYS YOU'LL ONLY UNDERSTAND ALWAYS YOURSELF. If there's enough 4U!:birthday:

First disable your Caps Lock and second take it easy.:shot:

glk96000
28th June, 2010, 08:26 AM
you do not know if the audi A4 RB8 end 2006 has a eeprom encrypted or not?

when you say you do Roomster by eeprom is that you Dessoude the eeprom?

carprog with, we can change the KM in dash and ECU?

Yes i do the RB4 and RB8 i test on a A4 2006
it's possible to buy just RB4/RB8 update package price/2 without infinity ford nissan models (200?) :tee:

nauris
28th June, 2010, 11:55 AM
you do not know if the audi A4 RB8 end 2006 has a eeprom encrypted or not?

when you say you do Roomster by eeprom is that you Dessoude the eeprom?

carprog with, we can change the KM in dash and ECU?


carprog do A4 rb4 and rb8 encrypted and not encrypted by OBD automaticly, user can read EEPROM by OBD if he want, if not just click "change milage" and that all :)


roomster/fabia has 93c86 encrypted eeprom, so must desolder it and program with Carprog directlly

Carprog has ecd15/edc16 odometer programing by OBD, must buy update

regards

glk96000
28th June, 2010, 02:31 PM
carprog do A4 rb4 and rb8 encrypted and not encrypted by OBD automaticly, user can read EEPROM by OBD if he want, if not just click "change milage" and that all :)


roomster/fabia has 93c86 encrypted eeprom, so must desolder it and program with Carprog directlly

Carprog has ecd15/edc16 odometer programing by OBD, must buy update

regards


hi m8,

are you sure EDC15 by OBD with carprog?
i think it's by an other codecard interface

Flash_chip
28th June, 2010, 09:16 PM
I have magicdashcan. a good tool, but it not read all edc16...
Yesterday i make rb8 a4 2005, dash correct ok, but cant read edc16... But last time i make passat 2007 edc16 and no problems to read and write km in ecu...
it's good to know that the MAGICDASH do not EDC16:)
how you doing then EDC16?

Flash_chip
28th June, 2010, 09:24 PM
Yes i do the RB4 and RB8 i test on a A4 2006
it's possible to buy just RB4/RB8 update package price/2 without infinity ford nissan models (200?) :tee:
What you do with the RB4 and RB8? of which interface you talking about?
the EDC16, with what you make them?
you have a link to see the interface at 200 ?.

dbilik
28th June, 2010, 09:25 PM
it's good to know that the MAGICDASH do not EDC16:)
how you doing then EDC16?

I m not say that magicdash not do edc16, but it not do all edc16..
the best way is to program manually after build the ecu outside..

Flash_chip
28th June, 2010, 09:47 PM
I m not say that magicdash not do edc16, but it not do all edc16..
the best way is to program manually after build the ecu outside..
Yes, but what interests me is an A4 RB8 in late 2006 and like you, you've already tried on an A4 RB8 2005 and it does not work. it will be the same for me.

how do you do for EDC16?
File read and modified KM manual?
OR
desolder eeprom?

supplier has no solution to this problem?

dbilik
28th June, 2010, 09:52 PM
i do only the dash and erase the fault codes...
but edc16 i not do in this car because its take some more time, i never do this befor and the client have not enough money to do all... i will ask tomorrow the supplier about this problem...

glk96000
29th June, 2010, 08:32 AM
What you do with the RB4 and RB8? of which interface you talking about?
the EDC16, with what you make them?
you have a link to see the interface at 200 ?.


200? is for the update RB4/RB8 (test and work fine)
carprog interface cost is 330?
EDC16 + EDC15 update 300? (:hmmmm:)

if magicdash do EDC16 you save your money on buy magicdash
when i read the post where dk members speak about magicdash it work once on two :vollkommenauf:

glk96000
29th June, 2010, 08:38 AM
Yes, but what interests me is an A4 RB8 in late 2006 and like you, you've already tried on an A4 RB8 2005 and it does not work. it will be the same for me.

how do you do for EDC16?
File read and modified KM manual?
OR
desolder eeprom?

supplier has no solution to this problem?


Yes it's possible to desolder eeprom and modify the mileage on EDC16 eeprom is 95320 (with ecucalc)
it's not simple to open the ECU EDC16 (with thermic gun)
i think's pay a good interface and do a job properly

nauris
29th June, 2010, 10:51 AM
Yes it's possible to desolder eeprom and modify the mileage on EDC16 eeprom is 95320 (with ecucalc)
it's not simple to open the ECU EDC16 (with thermic gun)
i think's pay a good interface and do a job properly
yes, it is verry dificult to open edc16 :( , it is posible to damage pcb..... best way by OBD!

groovie
5th July, 2010, 08:46 AM
Try this program to read / write eeprom of the ECU EDC16.
In another program, change the mileage and write to ECU
This program works with the interface KL-line or KKL-line.
:wink:
(http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=8392&stc=1&d=1261439708)


supi
das hat mir echt weitergeholfen

rsibiza
5th July, 2010, 09:15 AM
yes, it is verry dificult to open edc16 :( , it is posible to damage pcb..... best way by OBD!



Verry difficult!?

You just need head up the joint with thermic gun,not too hot,and start opening with screwdriver...

Once is opend a bit continue with plastik special utility( Karosserie keil)...it s not so dangerous work with plastik tools to open,as they are not so hard as screwdrivers and you will not pull off some pieces off PCB.

milkatrek
18th December, 2010, 11:25 AM
Hi
someone know which hardware working properly with this sw ECUTool004a (http://www.digital-kaos.co.uk/forums/attachments/f155/8392d1261439708-vag-edc16-tool-ecutool004a.rar)
I trying with kkl and freezing.

WBR

ipejasinovic
18th December, 2010, 11:39 AM
EDIT: My mistake, sorry.

d2mike
12th December, 2016, 11:30 AM
*push*
Any "new" Tool which is working w/ simple KKL lead for EDC16?

d2mike
16th December, 2016, 10:34 AM
***PUSH***

reini1976
18th December, 2016, 08:19 PM
I'm also searching an OBD-Tool to read EDC16 eeprom. Can someone help?

With best regards

d2mike
19th December, 2016, 02:41 PM
me 2.
I'm seraching something for KKL or VCDS interface.
Is there something?

Jashmine1983
28th December, 2016, 07:30 PM
By kkl...VAG DASH...but the best is reading eeprom and using EDC16 Calc.

electronistul21
31st December, 2016, 05:30 AM
you can try and carprog for this work.last version have VAG ECU .i testing and in some works,in some no.

Romcik
11th July, 2017, 08:23 AM
FVDI
Xtool if I am correct

Dodo123
8th June, 2020, 11:24 AM
Any update on working tools for edc16