Dump CAS3 ok or not ok

[hrmotorsport]

Hi all, i have a car e87 with cas3 blocked, i think its flash problem but i upload fls and epp, if anyone can check it i apprecate

thanks!

[droidwayne65]

Hi all, i have a car e87 with cas3 blocked, i think its flash problem but i upload fls and epp, if anyone can check it i apprecate

thanks!
Try and lemme know. Eep in pgrm mode. Don't have a flash for that number.

[hrmotorsport]

Hi sir, then fls is ok?


Enviado desde mi iPhone utilizando Tapatalk

[droidwayne65]

Hi sir, then fls is ok?


Enviado desde mi iPhone utilizando Tapatalk
Closest I've got is a 2360 and they look similar, but I can't do a comparison to say with certainty that yours is ok.

[droidwayne65]

I tested the fixed eeprom, along with your flash and the CAS communicates just fine. I then proceeded to update to the latest version :biggrin:. Here are those files.

[hrmotorsport]

Finally i repaired only with flash, not touched eep. Updated with avdi now works fine

Seems only flash was damaged

Thanks a lot for all your help


Enviado desde mi iPhone utilizando Tapatalk

[hrmotorsport]

finally you have the reason, fls was ok, epp wrong. In car, not start, from avdi support say in epp is linked to fls 9262361 and then, avdi dont have this version in his support, so, i found same cas ref, readed fls and too too closest as original, i uploaded new readed.

Then, i think epp is wrong or have another version inside or i dont know, but i flashed your fls and eep and will test later.

Thanks a lot

[hrmotorsport]

Tested your files and working fine. Start engine perfect without coding anything on car, you are the best


Enviado desde mi iPhone utilizando Tapatalk

[droidwayne65]

Tested your files and working fine. Start engine perfect without coding anything on car, you are the best


Enviado desde mi iPhone utilizando Tapatalk
Good to hear. Which set did you use? :)

[hrmotorsport]

Latest, but i have one error in cas

A0aa control unit fault


Enviado desde mi iPhone utilizando Tapatalk

[hrmotorsport]

Appears error in cas and dash and other modules about cas. I try add new key but key is blocked and cant do ignition. dash show this

https://uploads.tapatalk-cdn.com/20190612/56f4bbb796a02d87c1850509173426ac.jpg


Enviado desde mi iPhone utilizando Tapatalk

[droidwayne65]

Clear your Inbox. :)

[hrmotorsport]

Sorry i was half day repairing this cas. Finally i flashed one flash same version and original eep. Then with avdi flashed with same version as original all ok.

This is the final solution, but i tested a lot times some combinations of eep fls fixed by you and ori from damaged cas[emoji2359]

Big big thanks for all your help sir.


Enviado desde mi iPhone utilizando Tapatalk