Ford Fiesta Radio Code Z

[Alekso]

Hello,
I didnt find thread for Ford Fiesta radio codes with Z,
Is it posible to find tradio code
radio code Z042832

[Rdecode]

Not coded...

[Alekso]

after battery remove its showing code _ _ _ _
0000 its not working

[Rdecode]

after battery remove its showing code _ _ _ _
0000 its not working
Is it installed in original car?

Ok, lets assume the radio acts like Chrysler units when installed in not original car, so try following codes:

6047
7147
0446
8068
0044

and 1234 too

and report on results here!

[Alekso]

Hi,
I try all the codes but non of them is working,

[Alekso]

Hello,
I find way how to decode the Z code radios.
On the central display I find new sticker with new V code, I just calculate the V radio code and its working
CODE 8618



Thank you for the help,

[Rdecode]

Hello,
I find way how to decode the Z code radios.
On the central display I find new sticker with new V code, I just calculate the V radio code and its working
CODE 8618



Thank you for the help,


Good to hear that.

So, the code is asked not by radio module (Z serial), but by display module with V serial.
So, every time we see Z serial we ignore it and try to find another module with M,V etc serials to unblock the audio system.

[Alekso]

Yes, but the v code sticker is on the central display.

[Rdecode]

Yes, but the v code sticker is on the central display.
yes, so next time one removes central display module and not radio module.

[Alekso]

Yes, .

[criollo]

Hello,
I find way how to decode the Z code radios.
On the central display I find new sticker with new V code, I just calculate the V radio code and its working
CODE 8618



Thank you for the help,


Congratulations and thanks for the information.

[Rdecode]

The only question now is why it asked for the code, was it replacement unit?

Normally they do not require codes if installed in original car. Isn't it?

[kappa1]

Hi this post is bullshit! because i have friend work tehnician for FORD and in 11 year him never see this model ask code !

For all FORD serial Z not exist ...

[Rdecode]

Hi this post is bullshit! because i have friend work tehnician for FORD and in 11 year him never see this model ask code !

For all FORD serial Z not exist ...

Yes, you are right for control unit with Z serials no code is required, but user says there is a display unit in this audio system with V serial and it asked for the code...

The question is why it asked for the code?

The only reason is probably it is replacement unit and asks for the code if radio is installed in not original car, like it is done for Chrysler modern radios.

We just need user to confirm this.

[Alekso]

Hi,
Radio is original from the car, it have same VIN number and there is no fault codes.
Problem start when I try to program new key, when I try to program, incode-outcode calculation wash wrong. So I disconect battery, remuve the instrument panel and write the transponder directly in instrument. After I conect the battery, radio ask for code.
So I start to serching for new radio, and I notice that display unit have a sticker simular to the radio with V code, I caluculate and code was OK.
That all

[Rdecode]

Hi,
Radio is original from the car, it have same VIN number and there is no fault codes.
Problem start when I try to program new key, when I try to program, incode-outcode calculation wash wrong. So I disconect battery, remuve the instrument panel and write the transponder directly in instrument. After I conect the battery, radio ask for code.
So I start to serching for new radio, and I notice that display unit have a sticker simular to the radio with V code, I caluculate and code was OK.
That all

Thank you for this info.

I guess "removing instrument panel" caused the radio anti-theft system activation and not the simple battery disconnection... very interesting, since never seen ford mk7/mk8 owners complaining that radio asks for code after battery disconnect.

[Alekso]

Also what is intersting is that when I try to program key, I was useing Avdi - incode outcode calculation fail, Smart pro also incode fail.
Meybe the car have some other settings or software.

[sucharek76]

hello to all
code please for this

Radio AHU 8A6T-18C815
serial Z013375

[Decode Ghost]

hello to all
code please for this

Radio AHU 8A6T-18C815
serial Z013375
try..........3726

[shooting]

hello to all
code please for this

Radio AHU 8A6T-18C815
serial Z013375

Radio Ford Wiring (digital-kaos.co.uk) (https://www.digital-kaos.co.uk/forums/showthread.php/661207-Radio-Ford-Wiring)

Stick to ONE thread........

wbr

[Rdecode]

hello to all
code please for this

Radio AHU 8A6T-18C815
serial Z013375

Read post #7 (https://www.digital-kaos.co.uk/forums/showthread.php/751985-Ford-Fiesta-Radio-Code-Z?p=3605553&viewfull=1#post3605553)

[Francki]

Hi
Very interesting thread. Unfortunately, I faced the issue with "blocked" Z series radio in my Ford Focus Mk3 2011r. Radio is Sony AHU, Part no: BM5T-18C815-RE and it's serial no: Z007215. After sucessfull firmware upgrade of PDM&DDM (doors modules) my vehicle started to ask for the 'Radio code'. After reading this thread I've checked the display numbers and they are: Part no: AM5T-18B955-CG, serial no: B6F00V032753. Based on J-SKy 'V' code generator, code for V032753 is 5229 (please confirm guys). I've tried to put this code but it's incorrect :(
WHat's intersting, someone from Facebook told me "try code 9668" and... it works but only untill next radio power off/power on cycle. When radio is restarted it asks for code again. I have no idea why 9668 temporary unblocks my radio (it wasn't calculated based on my serials). Does anyone of you guys how can I solve this issue? Putting radio code everytime I starting my car is a little bit irritating. Maybe I should do some 'factory reset' or radio/display reprogramming? Any hints are appriacated

934423934424934425

[carradio2001]

If you can try that.

BR,
Carradio2001.

[Francki]

Which one ?

[irfa]

Hangisi?6865 mate........

[Francki]

Sorry, initially I didn't notice image with code calculated (wasn't visible on my phone). I will check the generated code in the evening and will let you know. Thanks!

[Francki]

Hello
@carradio2001 - thanks for you effort and for the code. Unfortunately it isn't correct. I've found on UCDS forum that this radio doesn't have any 'PIN Code' protection and problem is with FCDIM module (display module) and firmware of this module needs to be flashed (I'm almost ready to perform this operation). Issue was caused by another module update (DDM in this example) with UCDS "Update wizard". Now I know that using "Update wizard" of UCDS application isn't very safe and operation can break the FCDIM firmware. I will inform you about the results.
Thanks for all your help guys!

[Francki]

OK, problem finally has been fixed. As previously said, PIN code wasn't in the radio itself but in FCDIM module (main display, connected to 'radio' module). I've tried with firmware flashing/upgrading but without any result. Finally, I found that original UCDS application has option 'Disable MFD4 Keycode Security" in FCDIM tab and this solved my problem permanently. Procedure took just few seconds but the main problem was with original UCDS app :) Fortunately I had an access to this software. Hope that this info will save somebody's time and nervous :) Thanks for all your help guys

[kappa1]

FORD SERIAL Z Not there is in dealer Ford !
Try code 5229 from display serial V032753

[zorans]

can some one calculate code from serial Z155153. Part number AA6T-18C815-AD.
Thanks in advance

[shooting]

can some one calculate code from serial Z155153. Part number AA6T-18C815-AD.
Thanks in advance

Remove the display and search for another serial starting with "V"





wbr

[zorans]

Unfortunately I have only unit, without car.

Sent from my SM-G9750 using Tapatalk