PDA

View Full Version : audi q7 2012 air suspension



bigjay88
18th June, 2019, 08:58 AM
hi lads,

any air suspension experts here ?

i am stuck with an audi Q7 2012 suspension system

I have replaced the pump, g185 but still same
suspension won't work.

vcds faults are :





Address 34: Level Control Labels: None
Control Module Part Number: 4L0 910 553 H HW: 4L0 907 553 E
Component and/or Version: LUFTFDR.-CDC H04 7870
Software Coding: 0015520
Work Shop Code: WSC 29435 002 1048576
VCID: 2F6C9E18BEC9A83E23-807A
4 Faults Found:


01583 - Leak in System Detected
000 - -
Freeze Frame:
Fault Status: 11100000
Fault Priority: 3
Fault Frequency: 2
Reset counter: 7
Mileage: 0 km
Time Indication: 0


Freeze Frame:
Error Code: 70


01577 - Turn-Off due to Over-Temp
001 - Upper Limit Exceeded - Intermittent
Freeze Frame:
Fault Status: 00100001
Fault Priority: 6
Fault Frequency: 1
Reset counter: 168
Mileage: 193125 km
Time Indication: 0
Date: 2019.06.17
Time: 03:39:18


Freeze Frame:
Error Code: 68


01400 - Suspension Level Control
002 - Lower Limit Exceeded - Intermittent
Freeze Frame:
Fault Status: 00100010
Fault Priority: 2
Fault Frequency: 1
Reset counter: 168
Mileage: 193125 km
Time Indication: 0
Date: 2019.06.17
Time: 21:28:22


Freeze Frame:
Error Code: 67


02250 - Function Deactivation; Valve Duty Cycle
001 - Upper Limit Exceeded
Freeze Frame:
Fault Status: 11100001
Fault Priority: 6
Fault Frequency: 5
Reset counter: 7
Mileage: 193125 km
Time Indication: 0
Date: 2019.06.17
Time: 21:34:04


Freeze Frame:
Error Code: 46

Meat-Head
18th June, 2019, 12:34 PM
Not sure if correct car but wiring loom gets chocked up with excess dk posts and thanks, this causes wiring to rot
silly place to put wiring as prone to get thanks stuck init