PDA

View Full Version : BMW 325I N52 2F45 IMMOBILISER CAS READ



motorsportsz
18th June, 2019, 09:35 PM
hi there

bought this bmw off a friend

car ecu and cas was stolen.

so i purchased a lock set from a working car.

ecu, cas, ignition switch, cluster. Came with three keys



I have error 2f45 ews/cas dataline.

with fvdi i can read isn from ecu but cannot make synchronization. I cannot read isn from cas, however i read this with xprog and can see the isn. Tried Launch and Inpa also.

ISN: 4B A2

I know this ecu starts the car it come off but issue is when i opened the ecu to read files. the bdm pads are broken.


Can someone have a look at my CAS read and fix it if needed to be fix


thanks

droidwayne65
18th June, 2019, 10:43 PM
hi there

bought this bmw off a friend

car ecu and cas was stolen.

so i purchased a lock set from a working car.

ecu, cas, ignition switch, cluster. Came with three keys



I have error 2f45 ews/cas dataline.

with fvdi i can read isn from ecu but cannot make synchronization. I cannot read isn from cas, however i read this with xprog and can see the isn. Tried Launch and Inpa also.

ISN: 4B A2

I know this ecu starts the car it come off but issue is when i opened the ecu to read files. the bdm pads are broken.


Can someone have a look at my CAS read and fix it if needed to be fix


thanks
CAS live data shows all terminal values are ok?

Stopro92
18th June, 2019, 10:55 PM
Recently, I also had a problem with this, to synchronize on the table you have to read the flash ecu from what I found out

Lambda1
18th June, 2019, 11:00 PM
Yes looks fine.
ISN also there, same as you told.

Why ecu bdm pads are broken?

motorsportsz
18th June, 2019, 11:25 PM
i guess someone has previously cloned this ecu hence the bdm pads

ive updated the first post with cas flash too


Would it make a difference if vehicle previously had cas 3 and my lockset being from cas 2?

I have no idea what my original cas was

Stopro92
19th June, 2019, 01:36 AM
Need flash ecu no cas.

From what I see after vin it comes out that it should be CAS3

motorsportsz
20th June, 2019, 05:08 AM
Need flash ecu no cas.

From what I see after vin it comes out that it should be CAS3

Is this the only way? As I see people have had it fixed by their cas dump