8j0959655 Airbag module swap problem

[Bianko16]

Hi all, I have this airbag module 8j0959655 from Audi TT and I swap with another airbag module with same code but it doesn’t work, also when I connect the new module I have no communication with diagnostic... it maybe need a reset o make a virgin dump ?

in Attachments the original dump from the fault module...
is possible to repair it?

these are the error with vcds:


Address 15: Airbags Labels: 8J0-959-655.lbl
Control Module Part Number: 8J0 959 655 HW: 8J0 959 655
Component and/or Version: -n Airbag 9.43 H02 0010
Software Coding: 0011630
Work Shop Code: WSC 01236 785 00200
VCID: 79F987823018788AE7-802C
7 Faults Found:

00588 - Airbag Igniter; Driver Side (N95)
001 - Upper Limit Exceeded - MIL ON


00589 - Airbag Igniter 1; Passenger Side (N131)
001 - Upper Limit Exceeded - MIL ON


01587 - Igniter 2 for Airbag; Drivers Side (N250)
001 - Upper Limit Exceeded - MIL ON


00590 - Igniter 2 for Passenger Airbag (N132)
001 - Upper Limit Exceeded - MIL ON


00654 - Seat Belt Tensioner Igniter; Driver Side (N153)
007 - Short to Ground - MIL ON

00655 - Seat Belt Tensioner Igniter; Passenger Side (N154)
001 - Upper Limit Exceeded - MIL ON

01590 - Igniter for Battery Disconnect (N253)
001 - Upper Limit Exceeded - MIL ON

[sbkracer1]

Module has crash