Peugeot 307 BSI 95160 dump.

[p1et]

Hi,

Can someone check me if this file is correct? I have car with probably faulty BSI but I don't know if this was caused by battery went flat or me trying to read PIN with Lonsdor (after re-charge battery). Car is without any working key and the symptoms are: not working wipers, only rear left exterior light working, signals are working but cannot hear them, windows are not working (not sure if they should work in economy mode), central button locking in console is working.

[kiszka]

Hi,

Can someone check me if this file is correct? I have car with probably faulty BSI but I don't know if this was caused by battery went flat or me trying to read PIN with Lonsdor (after re-charge battery). Car is without any working key and the symptoms are: not working wipers, only rear left exterior light working, signals are working but cannot hear them, windows are not working (not sure if they should work in economy mode), central button locking in console is working.

........ CLR3 ........ or ......... 3RLC .........

[p1et]

Thank you friend, so this BSI eeprom is okay? You gave me same pin code from ECU dump yesterday (3RLC). If BSI eeprom is good then what might be problem? Should I try write eeprom to donor BSI same part numbers? Or maybe BSM module might be faulty?

[stoyanov]

I think file is good,login 3RLC
Check immo live data in bsi and engine ecu.

[p1et]

I forgot to mention I cannot program new key right now. I don't have Lexia or Diagbox at the moment but will have next week.