View Full Version : Vag me 7.1.1 delete dtc
radoslawwiklik
21st June, 2019, 04:03 PM
Its possible? Thanks
p1130, p0174
morgano
21st June, 2019, 08:39 PM
Its possible? Thanks
p1130, p0174
Try this ;)
Regards,
vitaliyl
21st June, 2019, 08:40 PM
thanks+rep=pass ;)
morgano
21st June, 2019, 08:58 PM
thanks+rep=pass ;)
hahahaha we posted almost at the same time ;)
radoslawwiklik
21st June, 2019, 10:40 PM
Thanks morgano but in your file propably problem with chks, car not running
morgano
21st June, 2019, 10:45 PM
================================================== ============================
me7check v1.12 (c) mki, 06/2004-05/2012
Checking file WinOLS (Audi A8 (P1130 P0174 off).bin (size=1048576)
Reading Version Strings...
-> Bootrom Version = embedded in CPU, asume 06.02/06.05
-> EPK = 42/1/ME7.1.1/5/8542.02//25F/Dst47o/230304/
-> Contents of ECUID data table:
- '0261208497' (SSECUHN)
- '1037368683' (SSECUSN)
- '4E0910560J ' (VAG part number)
- '0010' (VAG sw number)
- '4.2L V8/5V ' (engine id)
-> Contents of ECUID data table:
- 'HW_MAN004'
-> No errors found. File is OK. *********************
Sorry, to hear.
radoslawwiklik
21st June, 2019, 10:50 PM
You have rights, problem is gal v54
vitaliyl
21st June, 2019, 11:02 PM
use bootmode in gal v54 for flashing ME7
morgano
21st June, 2019, 11:03 PM
That me7.1.1 sometimes give hard time when flashing obd, better is bootmode.
radoslawwiklik
26th June, 2019, 07:28 AM
Friends, many thanks but i'm file morgano and vitalyl still dtc come back after few kilometers, i write file by boot mode. Any idea?
morgano
26th June, 2019, 01:48 PM
P1130 - Audi
Type
Powertrain - Manufacturer Controlled DTC - Manufacturer Controlled
Description
Long term fuel trim, entire speed/load range, Bank 2 - system too lean
Cause
Fuel pressure/pump, injector(s), intake/ exhaust leak, AIR system, hose leak
Did you check this? Seems lambda related problems.
vitaliyl
26th June, 2019, 04:00 PM
Friends, many thanks but i'm file morgano and vitalyl still dtc come back after few kilometers, i write file by boot mode. Any idea?
put diagnostic errors here
radoslawwiklik
26th June, 2019, 07:19 PM
P1130 p0174
vitaliyl
26th June, 2019, 08:48 PM
try & report, pass is old
cardivision
25th January, 2021, 01:16 AM
Hello Friends,can someone help me to remove some DTCs from my files fom Audi A3 8P R32 with ME 7.1.1 i have try with vag dtc remover and wont work and MTX wont have this ECU.
DTCs: 16725 , 17560 , 17498 , 17486
Real appreciate your help,
Thank you,
Gita
25th January, 2021, 07:32 AM
16725 P0341
17560 P1152
17498 P1090
17486 P1078
check pm for pass
cardivision
25th January, 2021, 01:08 PM
Ok i will try it today and let you know,
real appreciated for your help
Thank you
cardivision
25th January, 2021, 09:41 PM
Every thing perfect it work at once,
Thank you so much
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.