Audi A8 2007 year mileage change

[aeroyas]

Hi freinds, please i need to change mileage for an Audi A8 year 2007, i have try with vag commander 2.5 it give the odometer is changed but in cluster never changed, i have read the eeprom 93LC86 but dont find mileage on it, the actual mileage in car is 89492Km and i need 32000 Km, anyone here can help please? thank's a lot, i joined the dump here

[drpeter]

Hi freinds, please i need to change mileage for an Audi A8 year 2007, i have try with vag commander 2.5 it give the odometer is changed but in cluster never changed, i have read the eeprom 93LC86 but dont find mileage on it, the actual mileage in car is 89492Km and i need 32000 Km, anyone here can help please? thank's a lot, i joined the dump here

I think you've got a VDO cluster, from june 2006 it's not possible to adjust the mileage by just programming the eprom, you must bypass the login code, so you need a special programmer for this, like Rosfar R200 or Enigma.
If you only change the eprom, the km will be about the same like the original (a bit lower then original) because you can't change the CPU part.

You can check it, your board is made by Siemens VDO featuring two Fujitsu microcontrollers marked MB91F366 and MB91F368 with serial EEPROM named 93c86 or 93lc86.

[PremierD]

I think you've got a VDO cluster, from june 2006 it's not possible to adjust the mileage by just programming the eprom, you must bypass the login code, so you need a special programmer for this, like Rosfar R200 or Enigma.
If you only change the eprom, the km will be about the same like the original (a bit lower then original) because you can't change the CPU part.

You can check it, your board is made by Siemens VDO featuring two Fujitsu microcontrollers marked MB91F366 and MB91F368 with serial EEPROM named 93c86 or 93lc86.

It rounds it down usually to the nearest 1000....(i think )....But only the once ..( in case someone was thinking of doing several times ):sleep:

[aeroyas]

okay freind, job is done by VAG PROG only, thank's for your help, and good luck to all

[AyceeDeeCee]

The handheld VAG K+ CAN works perfectly on these.

[aeroyas]

no freind, i have try VAG K CAN many times on this car but dont work

[alpha-music]

Hello,

also now tested a lot of tools on this but no success

Reading was never Problem

VDO H82 0530

Any idea who can do this car...

[exe123]

Rosfar R200 will do it.
Digiprog and Smok can also patch firmware on these dashs

[cokolo]

Hello,

also now tested a lot of tools on this but no success

Reading was never Problem

VDO H82 0530

Any idea who can do this car...

AVDI can do Audi A8 till 2010 :proud:

[diagnoza_auto2000]

Smok too,tested :)

[H.Wessel]

Anybody tried vag dash can with type of fujitsu dashes??Vag dash can said that A3 with fujitsu it?s possible by obd...

[markbmark]

my vag prog works fine on later A8

[diagnoza_auto2000]

Untill 2009 i see solutions but after 2009(new model) for the moment its need to read s key by obd and read eprom direct and then prepare new km.

[Pavel-DN]

orig
VAG P.N. 4E0 920 901c
odo 89496
try this...

[polat]

dp3 or enigma