PDA

View Full Version : picasso m7.4.4 immo off



atomiczen
26th June, 2019, 12:15 PM
Hi , i need solution for immo off a picasso 1.6 petrol with bosch m7.4.4 0261207318
here 24F400 and 95080

baltazar3
26th June, 2019, 12:32 PM
Hi , i need solution for immo off a picasso 1.6 petrol with bosch m7.4.4 0261207318
here 24F400 and 95080
Here ..try first only e2p...not tested...in info says "cut F3" ...probably immo line....please report

P.S.
Clean inbox m8

atomiczen
26th June, 2019, 02:03 PM
Here ..try first only e2p...not tested...in info says "cut F3" ...probably immo line....please report

P.S.
Clean inbox m8
sorry, cleared

atomiczen
26th June, 2019, 02:34 PM
Here ..try first only e2p...not tested...in info says "cut F3" ...probably immo line....please report

P.S.
Clean inbox m8

programmed a virgin eeprom and car start. Only problem is Economy mode on dash, that swicth off after some seconds, but car run ok

baltazar3
26th June, 2019, 02:58 PM
programmed a virgin eeprom and car start. Only problem is Economy mode on dash, that swicth off after some seconds, but car run ok
Economy mode is normail...off after car start

atomiczen
2nd July, 2019, 10:35 PM
Economy mode is normail...off after car start
car have p1608 ecu malfunction and P0650 MIL Lamp malfuncion, lost ecu comunication on bsi, dash don't work
i need a virgin file for reprogram or someone can ad pin on my dump
here 95160 from BSI, pin is JYAF

lion0304
3rd July, 2019, 12:22 AM
car have p1608 ecu malfunction and P0650 MIL Lamp malfuncion, lost ecu comunication on bsi, dash don't work
i need a virgin file for reprogram or someone can ad pin on my dump
here 95160 from BSI, pin is JYAF

Fill Eeprom FF and recode BSI with Lexia

atomiczen
3rd July, 2019, 12:31 AM
Fill Eeprom FF and recode BSI with Lexia
FF into ecu or bsi eeprom?

atomiczen
4th July, 2019, 05:03 PM
FF into ecu or bsi eeprom?
resetted bsi and then telecoded, now dash is on, no economy mode, but oil lamp on, battery lamp on and speed 00 for some seconds, then --
on display on the right immobilizer fault

atomiczen
5th July, 2019, 11:45 AM
someone have ecu95080-bsi95160 dump married?

baltazar3
5th July, 2019, 05:35 PM
Try to remove eeprom from ECU at all,connect F3 and see..
P.S.
Xsara Picasso .....newer easy money

atomiczen
11th July, 2019, 12:25 AM
Try to remove eeprom from ECU at all,connect F3 and see..
P.S.
Xsara Picasso .....newer easy money
car don't start with ecu without eeprom