MED9.5.10 eeprom Checksum error

[nemena]

Could someone fix the checksum for this eeprom file? m95080
Thank you in advance:
Peter

[naprawa5]

Your file is too small.
It is misread.

[nemena]

What you read with K-tag is the same 1024 bytes 4 times.
Here is the read with k-tag.

[kiszka]

Could someone fix the checksum for this eeprom file? m95080
Thank you in advance:
Peter
is correctly read


Your file is too small.
It is misread.


What you read with K-tag is the same 1024 bytes 4 times.
Here is the read with k-tag.

this is incorrectly read
looking at the memory, which is in ECU

[nemena]

What do you mean by "incorrectly read" ?
Reading the eeprom by ktag you get the same dump as if you read the 95080 by eeprom programmer, but content is repeated 4 times

[naprawa5]

Your file eeprom ,cs ok.

[nemena]

Thank you, may I ask how you calculated the checksum?

[naprawa5]

You can.
You can also write if it is well calculated.

[nemena]

No, it was not. This is the correct file.
But still curious, how it is calculated.

[kiszka]

Your file eeprom ,cs ok.


:hmmmm2: lol lol

[naprawa5]

Med9 program edycji.

[Vitalik1983]

Could someone fix the checksum for this eeprom file? m95080 (p0601)

[kiszka]

Could someone fix the checksum for this eeprom file? m95080 (p0601)

>>> crc is ok <<<