Siemens PPD1.2 Checksum Correction

[g5n14]

Hello guys!
I was doing dpf off on Passat 2007 2.0TDI with Siemens PPD1.2

HW:
SW: 6576286583
VIN nr.: WVWZZZ3CZ7P164724
SW ver.:
Spare:
Engine: R4 2.0l PPD1.2
HW Ver.:
SW upg.: 03G997020N 4799
Installation:


FULL BDM ORI READ IS HIGHLY APPRECIATED AS WELL!



Readed out with kess reworked, flashed back modded file and now the car doesnt start. ECU easily reaches with VCDS with no visible fault codes, either no faults in immo module, but doesnt start.

Flashed the stock back - same problem.

I think the problem is that kess have done wrong CS.
Attached is the BDM read and eeprom if someone can check them and correct if possible.


Huge thanks everybody willing to help!

[g5n14]

Ok. Understood what happened. Kess written more data than he was supposted to and replaced some data with FF. Can someone send ori or add the missing data to my file? Thank you!

[g5n14]

When i Flash other ori files found on DK there is no connection to the ECU. When i Flash mine there is connection but the car doesnt start.

[g5n14]

Someone????

[g5n14]

In ori files found on DK data starts from 040000. I my file data starts from 000000. I have also readed out car with another SW, data also starts from 000000. I think that data from my file (000000-040000) should be added to ori. Does it sound logical?

[g5n14]

Ok. All the ori files i got are empty till 040000 and afrer 080000. I guess its all OBD reads. Someone got full bdm?

[SpecZ]

Use search..

http://www.digital-kaos.co.uk/forums/showthread.php/694392-Ori-Fil%C3%A9-03G997020N

[g5n14]

IM not an idiot, i tried all 5 files available on DK like ”full bdm”, but they are all empty 0-040000 and 080000-1ffff0, just like my OBD read. So its just people posting obd read and saying its full bdm.

[SpecZ]

IM not an idiot, i tried all 5 files available on DK like ”full bdm”, but they are all empty 0-040000 and 080000-1ffff0, just like my OBD read. So its just people posting obd read and saying its full bdm.

Flash SGO file....

Wait....you don't have a trusty machine to do that, just a clone that let you down....

Ok!!!!!!

[g5n14]

I have a chineese kess which made the shit, but i have good EU ktag from car-prog, which never did any shit to me. SGO is possible to Flash without bin conversion?

[g5n14]

Or you are talking about flashing with vag tools like vcp and ODIS? I dont have those unfortunately.

[kennfeld]

you need to patch your files and rebuild a new org file

your tool read partial

then you write as full format ?

[g5n14]

No. I readed full bdm. My first obd read 100% compares to full bdm in the map area (040000 to 080000). Bdm got also 0-040000 area and 080000-01fff0 area filled with info. I found some ”bdm” reads around dk, which are actually obd reads, because the info in any other area other than maps is missing. I found one kinda bdm read around dk, which has maps, bottom area with matching data to my file, but top area (before the maps) is empty. When i Flash a file with empty top there is no connection to the ECU, when i Flash my file there is connection, but no fault Codes and car doesnt start (cranks,sometimes even fires). I guess my bdm read is corrupted somewhere, Most probably in 0-040000 area, because i tried adding my top part to the dk ”bdm” read and nothing changes. Friend also sent me ”full bdm read” from alientech servers, but it was obd.

[g5n14]

And what do you mean by ”patch your files” i would be glad to do that

[kennfeld]

i don't have my office laptop right now
patch the file is a copy paste work done by a server designed to repair dumps

[g5n14]

Hey man, can you repair it?